How Do I Configure The System; Single Ird - Raymarine 45 STV User Manual

16 Raymarine 45 STV Satellite Television System - Owner's Handbook
CAUTION: In-line fuse
If you do not have a breaker in the power circuit, an in-line 5 A
quick blow fuse should be fitted to the positive (white) lead of the
power cable.
To connect the antenna control unit:
1. Connect the power and data cable to the connector on the rear panel of the
ACU.
2. Connect the RF cable to the connector on the rear panel of the IRD.
3. Connect the DC power supply to the connector on the rear of the ACU.

How do I configure the system?...

Your Raymarine 45 STV Satellite TV system can be connected with up to four IRDs
at the same time to receive pictures in different cabins offering the maximum
choice of channels. The following section shows the different combinations
available and their connections. In all cases the ACU must be connected to the
power/data connector of the antenna base plate.

Single IRD

This is the basic method for connecting your Raymarine 45 STV system.
RF1
RF2
POWER
Antenna baseplate
The RF cable from the antenna base plate should be connected to 'LNB', 'ANT' or
'Satellite In' on the rear panel of the IRD.
D7960_1
IRD
(not supplied)
Television Monitor
(not supplied)