System Set Up; Introduction - Raymarine 45 STV User Manual

System set up

System set up

Introduction

This section of the handbook describes how to set up your Raymarine 45 STV
Satellite TV system after installation using the ACU or the Graphical User Interface
(GUI) and includes the following functions:
• System start up.
• Change the default satellite.
• Monitor the antenna status.
• Enter set up mode.
• Setting the satellite pair.
• Setting the GPS.
• Setting the local frequency.
• Setting the DiSEqC method.
• Display versions.
• Setting antenna go position.
• Setting antenna move step.
• Setting the default satellites.
Many of the above functions will only be required at initial installation of your
system.
The satellite names shown on the ACU screen in the following illustrations may
Note:
differ from those on your ACU depending on your geographic location.
21