UniControl — is used for pitch, rotate and pan.
Range key— is used to zoom in and out.
1. Chart pitch.
i. If the chart is in 3D mode, select the Pitch option from the
softkey toolbar
ii. Use the rotary control to change the pitch angle of the chart
display.
2. Rotate (only available when the chart is in 3D mode)
i. Select the Rotate option from the softkey toolbar
ii. Use the rotary dial on the UniControl to rotate the chart
display.
Using the chart
3. Zoom— Use the range key to zoom in or out of the chart.
4. Pan— Use the trackpad on the UniControl to pan the chart.
Panning the chart using touch
In the chart application:
1. Swipe your finger across the display in the direction you want
to pan the chart.
Switching between 2D/3D chart view
You can quickly toggle between 2D and 3D views.
In the chart application:
1. Select the PRESENTATION softkey.
2. Select the 2D or 3D option, using the VIEW softkey.
77