Table of Contents
Advertisement
Using the TV's Features
Channel Setup
Advanced Settings
4
0
Select which input or channel should be automatically tuned
Go Back
when a button listed below is pressed on the remote control.
1
Auto Tuning
VCR
2
Front Input
Startup Channel
VCR2
3
Diagnostic Info
Not Connected
DVD
Input 2
SAT-CABLE (Satellite/Cable Box)
HDMI
Press OK to assign the channel that the TV tunes to when you
press a device button, like DVD, on the remote control.
Not Connected Choose this if you don't have this particular device connected to the TV, or if
you don't want the TV to automatically tune to the correct channel when you press one of the
device buttons on the remote.
Channel 2, 3 or 4 Device is connected to the ANTENNA/CABLE INPUT jack on the back of the
TV, and you want the TV to tune to channel 2, 3, or 4 when you press the corresponding button
on the remote. Reminder: make sure the device's Channel 2/3 or 3/4 switch is set to match the
channel you choose in Auto Tuning.
Input 1, Input 3 Compatible video source, such as a DVD player or satellite receiver, is
connected to the Input 1 or 3 COMPONENT/COMPOSITE INPUT jacks (Y/Video, Pb, Pr) on the
back of the TV and you want the TV to tune to the composite/component video input when you
press the corresponding button.
Input 2, Input 4 Device is connected to the Input 2 Video (V) or S-VIDEO jack on the
back of the TV and you want the TV to tune to the Video Input Channel when you press the
corresponding button.
Front Input Device is connected to the VIDEO IN jack on the front of the TV and you want the
TV to tune to the front Video Input Channel when you press the corresponding button.
HDMI 1, HDMI 2 Device is connected to an HDMI jack on the back of the TV and you want the
TV to tune to this input when you press the corresponding button.
Future Downloadable ratings
Your TV is equipped to support a downloadable rating system. It is similar to the current rating
system your TV has, called V-Chip. If a new rating system becomes available, the TV downloads it
automatically from the signal and there is nothing you need to do to receive the information. Once
it's downloaded, a new option appears in your Parental Control menu. This option and its name
are dependent on the content acquired from the broadcaster.
Note: These ratings are available only if the broadcaster is sending them.
auto Tuning Feature
The way you set up the Auto Tuning feature in the TV's menu
AUDIO (Audio Receiver/Amp)
corresponds to the device buttons on the remote and the way you have
Not Connected
RCA SAT2
each device connected to your TV. When you set auto tuning, you're
Not Connected
telling the TV what channel or input to tune to when you press the
device buttons on the remote control. This is especially useful for going
directly to an input like HDMI.
1. Press MENU (the Main Menu appears).
2. Highlight Channel Setup and press OK. Then highlight Advanced
3. Highlight Auto Tuning and press OK.
4. Highlight the device button field and continually press OK to scroll
The choices and a brief explanation follow:
Settings and press OK.
through the selection of inputs.
Chapter
Advertisement
Table of Contents
