Table of Contents
Advertisement
Other Information
Chapter 5:
Frequently asked Questions (FaQs)
Why does my TV take so long to turn on?
Quick Startup is a power-saving feature in your TV. Select either enable or disable, which ever option is best for you.
Enabling Quick Startup allows you to turn on the TV faster than if disabled. Keep in mind, if you disable Quick Startup
it adds approximately 30 seconds to your TV's turn on time.
What's the quickest way to view High Definition (HD) video?
Connect an off-air antenna to the ANTENNA/CABLE INPUT to view free local digital channels. You might need to
purchase an antenna. Go to page 8 for more information.
How do I tell an analog channel from a digital channel?
There are several different ways to tell if your channel is digital or not. Press the INFO button to display the channel
banner. Look at the left corner for a channel information. Channels displaying a D, primary channel, and a subchannel
are digital channels (not all digital channels have subchannels). Channels displaying an A, are analog. Go to page 31 for
more information.
Why does channel search find a lot of channels, but when I try to tune to them there's nothing there?
Some channels are enabled by the cable company that don't carry programming, such as video-on-demand. When
channels are unavailable, your TV's screen displays Weak or No Signal. You probably want to get rid of these so they
no longer appear in your channel list. Remove these in the Channel Setup menu. Go to page 37 for more information.
Why does the first channel search take a long time?
If you've checked each box in the channel search menu, the TV is looking for all available channels in the channel list.
If you do have digital channels, the TV is also searching for each subchannel of that digital channel.
How do I control other devices I've connected to the TV?
Because your TV came with a universal remote, you can program your remote to the button corresponding with the
device you have connected to your TV. Go to page 23 for information on programming your remote.
Why do I have sound, but no picture when I turn on my TV?
There is a lamp inside the TV which needs approximately one minute to reach full brightness. You'll hear audio during
this time and the picture increasingly gets brighter as the lamp warms up.
Why are there bars on my screen and can I get rid of them?
Analog channels are sent in a 4 x 3 format, which cannot fill a 16 x 9 screen like your TV. Most digital channels are
sent in a 16 x 9 format which do fill your screen, but sometimes are sent in 4 x 3. It depends on how the station or
device connected to your TV is formatting the video. Press the ZOOM +/- button to see the different formats available
that may eliminate the bars. Go to page 42 for more information on screen format.
1
Graphics contained within this publication are for representation only.
Advertisement
Table of Contents
