W-KING D8 - Wireless Speaker Manual

Package Contents

D8 Outdoor Wireless Speaker
USB Type-C Charging Cable
3.5mm Audio Cable
User Manual

Product Diagram

Specifications

Charging

Fully charge this speaker before first use. Connect it to a USB charger or charging port with the included USB Type-C charging cable to charge. When there are 3 solid white lights, your speaker is fully charged and ready for use. Charging takes around 4 hours.

Note
Please use 5V/2A power adapter to charge your speaker. Power adapter is NOT INCLUDED.

Power On/Off

Long press the ON/OFF button for 2-3 seconds to power on or off (LED indicator flashes blue or off)

Pairing

1. When you turn on the speaker, the speaker will automatically enter pairing mode and the LED indicator will start to flash blue rapidly
2. Activate the pairing function on your phone or other compatible device and select "W-KING D8"
3. If a code or pin is required for pairing, please enter "0000"
4. When successfully paired, the LED indicator will stay blue

Notes

• To reset the speaker (to clear the pairing list or any program errors), use a straightened paper clip or a toothpick to carefully short-press the reset hole
• The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired
• If your paired device is switched off or manually disconnected, the speaker will enter pairing mode and automatically shut down after 10 minutes
• If the speaker or connected device exceeds the operating range, the speaker will disconnect. The connection to the last successfully connected device will be re-established once you re-enter wireless range within 10 minutes. To connect to other devices, please repeat the previous "Pairing" steps

Playing Audio via Audio Input Connection

1. Connect the D8 to your PC, laptop, or other device with audio output port using the included 3.5mm audio cable
2. Long press the on/off button for 2-3 seconds to turn on, and the LED indicator will light up solid green

Notes

• The speaker will disconnect from your phone or other paired device when an audio cable is plugged into the audio input jack
• When playing audio using the audio input jack, press the volume + / - to adjust the volume and short-press play/pause to pause or resume. Next/previous track control on the speaker is disabled in audio input mode
• For some computers, you may need to access the audio control panel to manually set the speaker as the default audio device

Charging Phone/Tablet

1. Connect your phone/tablet to the USB port of the D8 speaker
2. Turn on the speaker, your device will be charged automatically
3. Turn off the speaker to discharge your device

Adjust Sound Effect

Short press the sound effect button "↑↓↑" to adjust sound effect

True Wireless Stereo Pairing

1. Turn on both of your D8 speaker simultaneously, you will see blue LED indicator flashes rapidly on the two devices
2. Select one speaker as the leading speaker, double press the ON/OFF button to start pairing.
3. After successfully paired, the blue LED indicator of the leading speaker flashes slowly and the secondary speaker LED keeps bright blue
4. Turn on your phone's Bluetooth, search "W-KING D8" and connect. The blue LED indicator of the leading speaker keeps bright. The two speakers will play music simultaneously when complete pairing
5. To disconnect True Wireless Stereo pairing, press the volume button "+" and "-" at the same time, you will see blue LED flashes rapidly on the secondary speaker, that means True Wireless Stereo unpaired successfully

Controls & LED Indicators

Product Care & Use

• Keep away from liquids, extreme heat, and strong magnetic fields
• Do not use this speaker at high volume for extended periods, as this may cause permanent hearing damage or loss

For questions, support, or warranty claims, contact us at Amazon E-mail: support.amazon@w-king.com