Tescoma GrandChef - Plasma lighter Manual

A Instructions for use

Modern kitchen lighter with windproof plasma beam. Excellent for gas cookers, catalytic lamps, aroma lamps, lighting paper to start a fire in a fireplace, as well as for lighting candles, cigarettes, cigars, etc. With integrated lithium-ion battery and easy charging using the enclosed cable from all devices that have a USB port such as computers, portable chargers, mains chargers, etc. Made of high-grade stainless steel and resistant plastic, with a safety lock and LED indicator.

Before first use

Unwrap and charge the lighter. Plug the mini USB connector of the cable into the USB port on the side of the lighter . The blue indicator lamp will go on; it will go off when the lighter has been fully charged (after 1 to 2 hours).

Application

Pull the safety lock to the "I" position; the blue indicator lamp will go on and the lighter is ready for use .
Notice: The blue indicator will go off after about 5 seconds, the lighter remains ready for use.

Lighting

Bring the end of the lighter very near the gas burner etc. and pull the lighting button towards yourself; the protective guard of the lighter will retract and the lighter will begin to form a plasma beam that will light the flame of the gas burner etc. By releasing the button the beam will be deactivated, the protective guard will return to the original position and the blue indicator lamp will go off after a while. Pull the safety lock to the "0" position after use.
Notice: A subtle hissing sound will be audible when the plasma beam is formed – a natural characteristic of the plasma lighter. The formation of the plasma beam ends automatically after about 7 seconds. When lighting repeatedly in short intervals, use the plasma lighter no more than 5 times; set it aside for a while before using it again.

Charging

Once the blue indicator lamp begins to flash in the lighting process, charge the lighter immediately. If you do not use the lighter for a prolonged period of time, store it with the battery charged.

Cleaning

Pull the safety lock to the "0" position before cleaning. Clean the lighter with a dry cloth, do not wash under running water or in dishwasher! If the contacts forming the plasma beam are clogged as a result of prolonged use, pull the safety lock to the "0" position and clean the contacts by wiping them gently.

Safety instructions

Do not destroy the lighter or put it into fire. Used lighter and USB cable are not domestic waste; dispose of them at a designated refuse centre or recycling site. Keep the product out of the reach of children, do not immerse in water. Do not charge the battery using other than a certified DC 5 V USB power supply.
Never touch the plasma beam, do not direct the lighter to people, skin or any inflammable materials other than those for which the product is intended. Make sure after each use that the plasma beam has been extinguished and the protective guard has returned to the original position. Do not expose the lighter to temperatures exceeding 50°C, direct sources of heat, sunlight, etc. Store with the safety lock in the "0" position. Do not repair the lighter yourself; instead contact an authorised repair shop; for contact details, see www.tescoma.com.

www.tescoma.com/video/428744