Connecting Additional Amplifiers; Plugging In - Pioneer VSX-33TX Operating Instructions Manual

Connecting Additional Amplifiers

This receiver has more than sufficient power for any home use, but it is possible to add additional amplifiers to
every channel of your system. Make the connections shown below to add amplifiers to power your speakers.
Before making or changing the connections, switch off the power and disconnect the power cord from the AC
wall outlet.

Plugging In

Up to two components can be powered from this receiver. Two of the outlets are switched, which means that
power is switched on and off with the receiver.
Before making or changing the connections, switch off the power and disconnect the power cord from the AC
wall outlet.
After connecting all your components, plug the receiver's power cord into a standard wall power outlet.
Connecting Your Equipment
ANALOG
INPUT
L R
ANALOG
INPUT
L R
ANALOG
INPUT
INPUT
Powered subwoofer
Caution!
Power consumption of any equipment
connected to the switched power outlets
should not exceed 100W (0.8 A).
To avoid overheating, fire risk and possible
malfunction, do not connect high-wattage
appliances such as heaters, irons, monitors or
TV sets to this units AC outlets.
Disconnect the receiver from the power
outlet when it's not in regular use, for exam-
ple, when on vacation.
Caution!
Do not connect a monitor or TV to this unit's AC
OUTLETS.
Front channel amplifier
Surround channel amplifier
Center channel amplifier
(mono)
21