Pioneer VSX-33TX Operating Instructions Manual page 25

4 THE FOLLOWING FOUR SETS OF
BUTTONS ARE DEDICATED TV
CONTROL. THEY ARE ONLY USED FOR
CONTROLLING YOUR TV.
TV VOL +/– buttons
Use to adjust the volume on your TV.
TV button
Use to turn on the power of the TV.
TV FUNC button
Use select the TV function.
5 4 ¢ /CHANNEL +/– buttons
Use to adjust the volume on your TV.
6 5(+)/∞(–)/2/3/ENTER buttons
Use to set up surround sound, speakers levels
& settings, and other set up features see p.27-
38). Specific use of these buttons is described
in conjunction with the operations they per-
form. For more information see each individual
section. Also, use these buttons to select radio
frequecies.
7 GUIDE button
Use to control the guide for TV/Satellite TV.
8 3 button (BAND)
Use to play components or use to switch between
the AM and FM band when in TUNER mode. You
can also use to select the green channel on digital
TVs (DTV).
9 7 button (D.ACCESS)
Use to stop other components. Also use to
directly access a radio station by pressing the
number of the station you want. You can also use
to select the blue channel on digital TVs (DTV).
0 ¶ (MPX)
Use to record other components. Also use to
switch between auto stereo and mono reception
of FM broadcasts. If the signal is weak then
switching to MONO will improve the sound
quality. You can also use to select the yellow
channel on digital TVs (DTV).
- RETURN button
Use to return to a previous setting during SETUP
operations
= S.MODE button
Use to select the screen mode.
~ MIDNIGHT button (see page 46)
Use to put receiver in MIDNIGHT mode. To use
first press the RECEIVER button then operate this
button.
! THX button (see page 39,41)
Press to select the HOME THX CINEMA sound
mode when listening to Dolby Digital, Dolby Pro
Logic or DTS a variety of other sources.
@ DSP button (See p.40-41)
Press repeatedly to select a DSP sound mode.
(HALL 1, HALL 2, JAZZ, DANCE, THEATER 1,
or THEATER 2, 5 CH STEREO). Use these
modes to produce surround sound from
standard (two channel) stereo sources and
create different listening environments.
Displays & Controls
# ADVANCED button
Use to select one of the four Advanced Theater
modes. Use to create certain types of sound
environments when listening to Dolby Digital,
Dolby Pro Logic or DTS sources.
$ STEREO button (See p.40 & 49)
Switches the receiver into STEREO mode if it
was in a different sound mode (like ADVANCED
THEATER) or toggles between DIRECT and
STEREO mode.
DIRECT playback bypasses the tone controls
and channel level for the most accurate
reproduction of a program source.
% LED DISPLAY
This display flashes when a command is sent from
the remote control to the receiver. It also flashes
at other times, for example when teaching the
receiver preset codes, with specific meanings.
^ RECEIVER
button
This switches between STANDBY mode and
power ON for this receiver.
& RECEIVER button
Use to switch the remote to the receiver control
mode.
* MASTER VOLUME +/– buttons
Use to set the overall listening volume.
( MENU button
Use to get the various menus for your TV or
DTV.
) 8 button (CLASS)
Use to pause components or use the CLASS
feature to switch between the three banks
(classes) of station memories. You can also use to
select the red channel on digital TVs (DTV).
_ ¡ button (DTV MENU)
Use to fast forward search on CDs etc.
Also you can access the DTV menu with this button.
+ 1 button (DTV ON/OFF)
Use to fast reverse search on CDs etc.
Also use to turn DTV on/off.
¡ RDM (DTV INFO)
Use to fast reverse search on CDs etc.
Also you can access the DTV information with this
button.
™ CLEAR button
This button clears the on-screen display (OSD)
of a digital TV (DTV) menu.
£ FUNCTION button
Press to select a source. The button will cycle
through all the possible sources.
¢ MUTE button
Press to mute or restore the volume.
∞ STANDARD button
Use for pure decoding of multi channel
sources, especially Dolby Digital, Dolby Pro
Logic, DTS sources.
25