Changing The Settings (Initial Settings); Operating The Initial Settings Menu - Pioneer DV-320K Operating Instructions Manual

Section

Changing the Settings (Initial Settings)

05
Operating the Initial Settings
menu
Initial Settings cannot be selected during
playback. Stop the disc first.
1 Display the Home Menu.
Press HOME MENU.
2 Select Initial Settings.
Use / / /  to select, then press ENTER.
3 Select the item and change the setting.
Use / / /  to select, then press ENTER.
Notes

HDMI Out, HDMI Resolution and
HDMI Color can only be set when the player
is connected to an HDMI-compatible device
using an HDMI cable (DV-420V only).

Digital Audio Out, AV Connector Out and
Component Out cannot be set when the
player is connected to an HDMI-compatible
device using an HDMI cable (DV-420V only).
Setting the Component Out and
HDMI Resolution settings back to
their defaults
1 Turn the player's power off.
Press  STANDBY/ON.
2 Press  STANDBY/ON while pressing
.
Use the buttons on the player's front panel.
The power turns on.
28
En
Restoring all the settings to the
defaults
1 Turn the player's power off.
Press  STANDBY/ON.
2 Press  STANDBY/ON while pressing .
Use the buttons on the player's front panel.