Before You Start; What's In The Box; Loading The Batteries In The Remote Control - Pioneer DV-320K Operating Instructions Manual

Before you start

What's in the box

 Remote Control

Audio/ video cable

Power cable

AA batteries (R6) x 2
 Warranty card
 Operating instructions (this document)
Loading the batteries in the
remote control
1 Open the back cover.
Press lightly on this part and slide into the
direction of the arrow.
2 Insert the included batteries (two size
AA batteries).
Insert the batteries in the proper direction, as
indicated by the  and  marks inside the
case.
Insert one at a time from the top.
3 Close the back cover.
Close the cover securely (a click should be
heard).
Notes
 Do not use any batteries other than the ones
specified. Also, do not use a new battery
together with an old one.
 When loading the batteries into the remote
control, set them in the proper direction, as
indicated by the polarity marks ( and ).

Do not heat batteries, disassemble them, or
throw them into flames or water.
 Batteries may have different voltages, even if
they are the same size and shape. Do not use
different types of batteries together.
 To prevent leakage of battery fluid, remove the
batteries if you do not plan to use the remote
control for a long period of time (1 month or
more). If the fluid should leak, wipe it carefully
off the inside of the case, then insert new
batteries. If a battery should leak and the fluid
should get on your skin, flush it off with large
quantities of water.
 When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction's rules that
apply in your country/ area.

WARNING
Do not use or store batteries in direct sunlight
or other excessively hot place, such as
inside a car or near a heater. This can cause
batteries to leak, overheat, explode or catch
fire. It can also reduce the life or performance
of batteries.
Section
01
5
En