Pioneer BDP-330 Operating Instructions Manual page 56

Troubleshooting
Network
Problem
Cannot connect to the Internet.
Cannot download BD-LIVE contents.
Control function with HDMI
Problem
Control function with HDMI does not
work.
HDMI indicator does not light.
Other
Problem
The TV operates incorrectly.
The Player heats up during use.
Input of connected TV and AV
system switches automatically.
Software cannot be updated
The front panel display shows
"HOLD", and operations are
disabled.
56
• Connect the LAN cable securely, pressing it all the way in. (Page 21)
• Do not connect with a modular cable. Use a LAN cable with the LAN (10/100)
terminal.
• Is the power for the connected equipment, such as broadband router or modem
turned on?
• Is the broadband router and/or modem properly connected?
• Is the proper value(s) set in the network setting? Check "Communication Setup".
(Pages 46 to 48)
• Is the LAN cable connected properly? (Page 21)
• Is the USB memory device properly connected? Check that the USB memory
device is connected to the USB port of this Player. (Page 21)
• Check if the BD disc supports BD-LIVE.
• Check the setting for "BD Internet Access". (Page 45)
• Connect the HDMI cable properly. (Page 17)
• Use High Speed HDMI
®
control function with HDMI may not operate properly if other HDMI cables are used.
• Set "Settings" – "Control" on the player to "Yes". (Page 44)
• The control function with HDMI does not work with devices of other brands, even if
connected using an HDMI cable.
The control function with HDMI will not work if devices that do not support the
control function with HDMI or devices of other brands are connected between the
control function with HDMI-compatible device and the player.
It may also not work with certain Flat Panel TVs.
• Set control function with HDMI to On on the connected device.
The control function with HDMI works when control function with HDMI is set to On
for all devices connected by HDMI cable. Once connections and the settings of all
the devices are finished, be sure to check that the player's picture is output to the
Flat Panel TV. (Also check after changing the connected devices and reconnecting
HDMI cables.) The control function with HDMI may not operate properly if the
player's picture is not properly output to the Flat Panel TV.
• The control function with HDMI may not work if three or more players, including this
player, are connected.
• Also refer to the operating instructions of the connected device.
• Connect to a control function with HDMI-compatible Pioneer Flat Panel TV using an
HDMI cable.
• Set control function with HDMI to On on the Flat Panel TV.
• Set "Settings" – "Control" on the player to "Yes". (Page 44)
• Check that the player's picture is being output to the Flat Panel TV.
• Some TVs with wireless remote control capability may operate incorrectly when
using the remote control of this Player. Use such TVs away from this Player.
• When using this Player, the console cabinet may heat up depending on the usage
environment. This is not a malfunction.
• When "Settings" – "Control" is set to "Yes" on the player, the input on the connected TV
or AV system (AV receiver or amplifier, etc.) may switch automatically. (Page 44)
• Remove any disc from the disc tray when updating the software.
• KEY LOCK is in effect. (Page 15) Depress the remote control unit's KEY LOCK for
five seconds or more to cancel the KEY LOCK function.
Possible causes and solutions
Possible causes and solutions
Cables when using the control function with HDMI. The
Possible causes and solutions