Advertisement
Use Cat 7 (*STP Type) cable for the connection.
* Shielded Twist Pair
Use the power components (1, 2, 3) to connect the power supplies in the following order:
Subwoofer → Soundbar Main Unit
For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of Soundbar main unit)
Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.
You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.
The Soundbar main unit and subwoofer should link (connect wirelessly) automatically when the Soundbar main unit and subwoofer are turned on. When auto-connection is complete, the blue indicator on the front of the subwoofer stops blinking and glows blue continuously.
If the indicator on the front of the subwoofer displays in red or flashes in blue, the subwoofer has not automatically connected. If this occurs, follow the directions below to connect the subwoofer manually.
Before you begin, put the battery into the remote.
If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.
You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
Before you begin, put the battery into the remote.
Method 1. Connecting with a Cable
If TV sound is not output, press the
button on the top of your Soundbar or the SOURCE button on the remote control to select the D.IN mode on Soundbar main unit display. Then, the D.IN mode is changed to TV ARC and TV sound is output.
If the Soundbar main unit display does not change to TV ARC, check the cable connections.
You can conveniently control the volume of the Soundbar and interlock power supply.
Method 2. TV SoundConnect (Linking to a Samsung TV with Bluetooth)
If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select Add New Device, and set Add New Device to ON. Then, try again.
If your Soundbar is connected to your TV through TV SoundConnect, you can conveniently control the volume with the Soundbar's remote or the TV's remote.
The TV SoundConnect (Soundshare) function is only available in some Samsung TV products released since 2012.
If you want to disconnect the existing connection to your TV and establish a new connection to another TV, press the
button on your remote control for more than 5 seconds.
In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.
Do not place electronic devices or metallic objects on top of the product. e.g., Wired/wireless router, set-top box, or modem.
Placing the product on the floor may degrade wireless network performance, depending on the floor material.
Method 3. Connecting to a Wireless Network
Installing the Samsung Multiroom App and Connecting Wirelessly
To install Samsung Multiroom app for the first time, follow the steps shown below.
You must enter the password of your wireless router to connect your Soundbar to your wireless network through Samsung Multiroom app.
If your wireless router has no designated password, the app completes the initial settings without asking you to enter a password.
Adding the Soundbar to an Existing Multiroom Audio System
If the Samsung Multiroom app is already installed for use with another multiroom audio device, follow these steps to add the Soundbar.
To connect a different network, select No.
You must enter the password of your wireless router to connect your Soundbar to your wireless network through the Samsung Multiroom app.
If your wireless router does not have a designated password, the app completes the initial settings without asking you to enter a password.
Connecting the Soundbar to your Samsung Smart TV
You can connect your TV to the Soundbar through a wireless network and enjoy the TV sound.
Make sure that the TV and Soundbar are connected to the same network. (How to check your Samsung TV network: Home menu → Network →Network Status)
Configuring Settings from your Samsung Smart TV
To play sound via the Soundbar, make sure that your TV model supports the Multiroom feature (Samsung Smart TVs released after 2014).
If the TV is disconnected from the wireless network due to a change to the input source of the Soundbar, use the TV menu to re-establish the connection.
Connecting Samsung Multiroom Audio System to the Surround
You can enjoy three-dimensional sound in surround mode after connecting two Multiroom Audios and a Soundbar.
Surround connection between a Multiroom Audio and a Soundbar is unavailable.
Refer to the web manual for connection between the TV and the surround.
You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!
It is not possible to connect multiple Bluetooth devices at the same time.
[If failed to connect to the Bluetooth device / If device searching is needed again]
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 32.8 ft.
The Soundbar automatically turns off after 15 minutes in the Ready state.
The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:
Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
Disconnecting the Soundbar from the Bluetooth device
Press the SOURCE button on the remote control or the button on the product's top to switch from BT to another mode or turn off the Soundbar.
You can enjoy sound from separate external devices such as a BD player/game console/set-top box, etc. by connecting them to your Soundbar.
Samsung may offer updates for the Soundbar's system firmware in the future.
Auto Update
The automatic update function is enabled on the Soundbar by default. Automatic firmware updates are searched for and performed if the Soundbar is connected to the Internet, irrespective of whether it is turned on or off.
To use the Auto Update function, the Soundbar must be connected to the Internet. The Wi-Fi connection to the Soundbar will be terminated if its power cord is disconnected or the power is cut off. If the power is cut off, turn on the Soundbar and reconnect it.
Updating with USB
If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar.
For more information about how to download update files, go to the Samsung Electronics website at (samsung.com/sec) → search for the model name → download the firmware from the customer support menu option. The option name can vary.
Installation Precautions
For Soundbar Main Unit (Wallmount Components)
Recommended screw: M5
Wall-Mount Screws are not provided.
Since different types of wall-mount screws are required depending on your wall, you should check your wall before installation and purchase the appropriate wall-mount screws to use.
Inserting Battery before using the Remote Control
CALIFORNIA USA ONLY
This perchlorate warning applies only to primary CR ( Manganese Dioxide ) Lithium coin cells in the product sold or distributed ONLY in California USA
" Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate. "
![]() | ![]() Power | Turns the Soundbar on and off. |
![]() | ![]() SOURCE | Press to select a source connected to the Soundbar. |
![]() | ![]() Mute | Sets the volume temporarily to 0. Press again to cancel. |
![]() | ![]() Volume | Adjusts the volume level of the unit. |
![]() | ![]() Play / Pause | Press the ![]() Press the ![]() |
![]() Skip Forward | Selects the next file. | |
![]() Skip Back | Selects the previous file. | |
![]() Repeat | The Repeat function is available only when playing back music from Songs on phone or DMS of Samsung Multiroom app.
| |
![]() | ![]() Surround Sound | The Surround Sound function adds depth and a sense of space to sound. When this button is pressed, ON or OFF is repeatedly alternated. |
![]() | ![]() SOUND CONTROL | You can select from TREBLE, BASS or AUDIO SYNC.
|
![]() | ![]() SOUND EFFECT | You can select from 6 sound modes: STANDARD, MUSIC, CLEAR VOICE, SPORTS, MOVIE, and NIGHT. When changing a channel or music source, the volume difference between different music input sources is automatically adjusted to be suitable for listening. |
![]() | ![]() Anynet+ | You can turn the Anynet+ and Auto Power Link on or off. The Anynet+ and Auto Power Link work in reverse to each other.
|
![]() | ![]() WOOFER | You can adjust the subwoofer volume between -12, or -6~+6 levels. |
![]() | ![]() STREAMING MUSIC | You can enjoy internet radio through Streaming Music. You can select your desired station from 3 internet radio stations by default. To use Streaming Music function, you should connect your Soundbar to a network. |
Before seeking assistance, check the following.
The unit will not turn on.
Is the power cord plugged into the outlet?
→ Connect the power plug to the outlet.
A function does not work when the button is pressed.
Is there static electricity in the air?
→ Disconnect the power plug and connect it again.
Sound is not produced.
Is the Mute function on?
→ Press the (Mute) button to cancel the function.
Is the volume set to minimum?
→ Adjust the Volume.
The remote control does not work.
Is the battery drained?
→ Replace with new battery.
Is the distance between the remote control and Soundbar main unit too far?
→ Move the remote control closer to the Soundbar main unit.
The TV SoundConnect (TV pairing) failed.
Does your TV support TV SoundConnect?
→ TV SoundConnect is supported by some Samsung TVs released from 2012 on. Check your TV to see if it supports TV SoundConnect.
Is your TV firmware the latest version?
→ Update your TV with the latest firmware.
Does an error occur when connecting?
→ Contact the Samsung Call Center.
→ Reset TV SoundConnect and connect again. To reset the TV SoundConnect connection, press and hold the button for 5 seconds.
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
Your subwoofer may not be connected to the Soundbar main unit.
→ Try to connect your subwoofer again.
The subwoofer drones and vibrates noticeably.
Try to adjust the vibration of your subwoofer.
→ Press the WOOFER button on your remote control to adjust its value (between -12, -6 ~ +6).
GENERAL | Weight | Soundbar Main Unit | 8.8 lbs (4.0 kg) |
Subwoofer (PS-WJ7500R / PS-WJ7501R) | 15.0 lbs (6.8 kg) | ||
Dimensions (W x H x D) | Soundbar Main Unit | 48.4 x 1.9 x 6.7 inches (1230.0 x 47.5 x 170.0 mm) | |
Subwoofer (PS-WJ7500R / PS-WJ7501R) | 17.8 x 13.2 x 6.1 inches (452.0 x 335.0 x 154.0 mm) | ||
Operating Temperature Range | +41°F to +95°F (+5°C to +35°C) | ||
Operating Humidity Range | 10% to 75 % | ||
AMPLIFIER | Rated Output Power | Soundbar Main Unit | 20W x 8, 8 ohm, THD≦10% |
Subwoofer (PS-WJ7500R / PS-WJ7501R) | 160W, 3 ohm, THD≦10% |
The following also applies to the Wireless Subwoofer (PS-WJ7500R, PS-WJ7501R).
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK. DO NOT OPEN. | |
| The lighting flash and arrowhead within the triangle indicates that there is dangerous voltage Inside the product. |
| The explanation point within the triangle indicates that there are important instructions accompanying the product. |
![]() | Class II product: This symbol indicates that a safety connection to electrical earth (ground) is not required. |
![]() | AC voltage: Rated voltage marked with this symbol is AC voltage. |
![]() | DC voltage: Rated voltage marked with this symbol is DC voltage. |
![]() | Consult instructions for use: This symbol instructs the user to consult the user manual for further safety related information. |
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.
DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD.
The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the remote and make sure to keep it away from children. If you think the battery might have been swallowed or placed inside any part of the body, seek immediate medical attention.
The party responsible for product compliance:
Samsung Electronics Co., LTD.
America QA lab of Samsung
19 Chapin Rd. Building D,
Pine Brook, New Jersey 07058
Questions or Comments?
COUNTRY | CALL | OR VISIT US ONLINE AT | WRITE |
IN THE US | 1-800-SAMSUNG (726-7864) | www.samsung.com/us/support | Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the HW-J7500R and is the answer not in the manual?
Questions and answers