oneisall LM2 - Pet Grooming Vacuum Manual

Package List

Product Overview

Product Technical Parameters

1. Install the Dust Cup

1. Align the snap-fit.
   

NOTE
If the device has no suction or is very noisy. please reinstall the dust cup

Use of Different Accessories

1. Daily Grooming Brush
   Used to clean floating hair and dander, making the hair more healthy, shiny, and soft
   

2. Electric Clipper
   1. Used to trim the pet's hair without leaving a mess as the hair will not fly around.
   2. While cutting, it suctions the cut hair!
      
      Use with vacuum or the clippers alone
   3. Dual-purpose: can be used for pet hair trimming or with the device.
      

NOTE
Remember to pay attention to the cutting edge and position, and do not use excessive force as it causes skin irritation.

Install Guide Comb (used with electric clippers)
Choose the length guide comb according to the length of pet hair you want to leave. The guide comb ((3mm/6mm/9mm/12mm/18mm/23mm)) is applicable for grooming different hair lengths.

• The guide comb set is small; keep it stored properly when it is not in use.
  

3. De-shedding Brush
   Used to remove the pet's long and unnecessary thick hair
   

NOTE
During use, pay attention to the cutting edge and position, do not use excessive force as it causes skin irritation.

4. Cleaning Brush
   Used to clean pet's paws or pet hair on clothes and furniture.
   

5. Crevice Tool
   Used to clean hair on the furniture and or hard-to-reach areas.
   

6. Pet Paw Trimmer
   Used to groom pet's paws, eyes, ears, face, and rump hair.
   

7. Pet Nail Grinder
   Used to groom your pet's nails.
   

NOTE
Be careful on the soft parts of the pet's skin, and do not use excessive force as it causes skin irritation.

Accessory and Power Mode

• The following chart is for advice only, please choose accessories and modes according to your needs!

Accessory	Power Mode
	Silence Mode	Standard Mode	Max Mode
	Cleans fallen hair from the sofa, corner, or other hard-to-reach areas	Cleans the fallen hair from the sofa, corner, or other hard-to-reach areas	Deep cleaning of stubborn dust. (A little noisy, but recommended)
	Cleans surface dust and makes the hair smooth	Airflow massage makes the hair glossy. (Recommended)	Deep cleaning to remove dead hair. (A little noisy)
	Trim styling, handling hairstyle detail. (Recommended)	With soft suction to trim and suck removed hair.	Don't recommend.
	Soft suction power to clean the pet hair on clothes.	Deep clean hair on your clothes	Strong suction power. (A little noisy, but recommended)
	Remove loose hair.	With soft suction to de-shed pet hair.	Suction to de-shed pet hair. (A little noisy)
	For dog and cat paws, eyes, ears, face, and rump hair.	With soft suction to trim and suck removed hair.	Don't recommend.
	Polish your pet's nails by rounding them out.	With soft suction to trim pet's nails.	Don't recommend.

Care and Maintenance

Cleaning the Dust Cup

1. Press the remove button and take off the dust cup.
   
2. Press the release button and pour out the hair.
   
3. Assemble the dust cup according to the arrow direction
   

• If the removed dust cup is cleaned with water or a wet cloth, be sure to install it after the dust cup is completely dry. Otherwise, it will damage the motor.
• Please take dust cup lightly, if it drops will damaged easily, if have any problems with the cup, please contact us on Amazon or contact us email: support@oneisall.com

Cleaning the Electric Clippers

1. Remove the blade by turning it counterclockwise.
   

2. Vacuum out and clean the debris from the blade and the clipper.
   

Cleaning the HEPA & Sponge Filter

1. Remove the dust cup and remove the HEPA & sponge filter.
   

2. Tap it or clean it with brush. Don't wash it with water.
   

3. Place the HEPA & sponge filter back into the machine.
   

Troubleshooting

• If the above solutions do not solve the problem, please stop using the product, and contact our customer support: support@oneisall.com

NOTE
The product is equipped with voltage protection device. If you hear a "didi" sound when you press the switch, and the gear lights are all flashing, means that the machine voltage is not consistent. Please check your voltage. If you have any problems, please contact us at any time with our email support@oneisall.com

Safety Warnings and Use Precautions

• This product is only for home use, not for commercial or industrial use, nor for outdoor or humid places.
• Supervise use for children and people with physical and mental disabilities.
• Please use the machine in a safe environment and under the instruction and supervision of a person who understands the safe use method and dangers of the product. In the absence of such a person, never let a child use it
• Please pay attention when using it near children and pets. In addition, please do not let children and pets play with this product.
• Please do not touch the power plug and the product with wet hands.
• Do not use this product if the power cord or power plug is damaged
• Do not use this product if the power cord is damaged or if the product is not working normally or damaged; contact our company.
• Please do not disassemble the product; the wrong assembly method may cause electric shock or fire; please contact our company if maintenance is needed
• Please do not inhale flammable or combustible liquids such as gasoline; in addition, please do not use the machine in or near an environment with flammable or combustible gases
• Do not pull the power cord, do not put heavy objects on top of the machine, and do not pinch the cord.
• Do not use it while smoking or working with other high-temperature items (matches, hot ash, etc.)
• Please do not put things into the opening or block the opening.
• Please unplug the power cord when you need to change the parts or conduct maintenance.
• Please do not use or keep it outdoors or in other wet places.
• Please do not use products with fragrance as the fragrance may contain flammable chemicals.

Use Precautions

• Please do not operate with wet hands or unplug the power cord to avoid failure and electric shock.
• Please do not smoke or use other flammable material. Please do not use the machine in or near an environment with flammable or combustible gases.
• There may be a strange smell during the first use; however, it will not cause adverse effects on the body.
• When using this product for the first time, it will smell, but it will disappear after a while. Please understand, however, that if the scorching smell persists, stop using it immediately!
• Please keep the dust cup and filter clean; if the dust cup and filter are used while dirty, they may cause failure, and unexpected accidents may occur.
• During maintenance, turn off the power supply and unplug the power cord before proceeding.
• If the power is turned on for maintenance, it will cause electric shock, unexpected accidents, or injury.
• The product will stop working when the temperature rises abnormally; in case of abnormal heating of the motor, stop using it immediately. If the suction opening is blocked, please stop using it immediately. Take out the dust cup and clean the inlet and filter, then open it again after 60 minutes. Please be sure to install and use the filter; if you remove the filter, it will lead to failure.

How to Initiate a Warranty Claim

If your appliance operates improperly while in use under normal household conditions within the warranty period, please contact our customer support team [support@oneisall.com] to initiate a warranty claim

For more warranty details, please refer to www.oneisall.com.

Any problems you have, please contact us: support@oneisall.com

Scan the QR-Code to get the product installation video and join us to get more prize

Documents / Resources

References

• Pet Grooming Vacuum, Pet Clippers, Automatic Pet Feeders & Fountains – oneisall

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download oneisall LM2 - Pet Grooming Vacuum Manual