Taking Pictures At A Set Interval (Interval Shoot) - Pentax Optio Optio WG-1 Operating Manual

Taking Pictures at a Set Interval (Interval Shoot)

In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
Interval
Number
of Shots
3
Start Delay 0 min. – 24 hours
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller
(45) to select k (Interval
Shoot) and press the 4 button.
The current interval shoot settings
appear for approximately 1 minute. To
take pictures with the current settings,
go to step 10.
3
Press the 4 button while the settings are displayed.
The [Interval Shoot] setting screen appears. [Interval] is marked with
the frame.
4
Set the interval.
1 Press the four-way controller (5).
2 Use the four-way controller (23)
to set the minutes, then press the
four-way controller (5).
3 Use the four-way controller (23)
to set the seconds, then press the four-way controller (5).
The frame returns to [Interval].
5
Press the four-way controller (3).
The frame moves to [Number of Shots].
108
10 sec. – 99 min.
2 shots – number of
recordable images
Set the camera to take pictures at intervals. The
intervals can be set in increments of one second from
ten seconds to 4 minutes, or in 1 minute increments
from 4 to 99 minutes. You cannot set the camera to
take interval shots at less than ten seconds.
You can set this to up to 1000 shots. However, it
cannot exceed the number of recordable images.
You can set 1 minute increments for the first 59
minutes and 1 hour increments from there. If the
start time is set to 0 minutes, the first picture is taken
as soon as the shutter release button is pressed.
Drive Mode Drive Mode Drive Mode
Interval Shoot Interval Shoot Interval Shoot
Cancel Cancel Cancel
MENU MENU MENU
Interval Shoot
Interval
Number of Shots
Start Delay
MENU
OK OK OK
OK OK OK
0 10
min. sec.
2
0 0
hr. min.