Powering The Camera; Charging The Battery - Pentax Optio Optio WG-1 Operating Manual

Powering the Camera

Charging the Battery

1
Use the supplied battery charger (D-BC92) to charge the supplied
rechargeable lithium-ion battery (D-LI92) before using it in the camera
for the first time or after a long period of non-use, or when the
[Battery depleted] message appears.
Note: AC plug cord "Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord,
rated 125 V, 7A, minimum 6 ft (1.8 m)"
Battery
Battery charger
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Place the battery in the battery charger so that the
PENTAX logo is facing up.
The charging indicator turns on while charging.
When charging is finished, the charging indicator turns off.
4
Remove the battery from the battery charger when
charging is finished.
38
Charging indicator
While charging: Lights
Charging finished: Turns off
3
1
2
To power outlet
AC plug cord