Taking Pictures At A Set Interval (Interval Shoot) - Pentax Optio W20 Operating Manual

Taking Pictures at a Set Interval (Interval Shoot)

In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
4
Interval 10 sec. – 99 min.
Number of 2 shots – number of
Shot recordable images
Start Time In 0 min. – 24 hours, 0 min.
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller (45)
to select k (Interval Shoot) and
press the 4 button.
The current interval shoot setting appears for
approximately five seconds. To take pictures
with the current setting, go to Step 8.
3
Press the 4 button while the
setting is displayed.
The Interval Shoot setting screen appears. [Interval] is marked with a
frame.
78
R A q < B i \ E 4 Q X y D N J R
Set the camera to take pictures at one second
intervals from ten seconds to four minutes or
at one minute intervals from four minutes to 99
minutes. You cannot set the camera to take
interval shots for less than ten seconds.
You can set this to up to 1000 shots. However,
this cannot exceed the number of recordable
images.
Set the start time in one minute intervals for when
the camera is to begin interval shooting. If the
start time is set to 0 min., the first picture is taken
as soon as the shutter release button is pressed.
10, 11
1, 2, 4, 5, 6, 7, 8
2, 3, 9
Drive Mode Drive Mode Drive Mode
Interval Shoot Interval Shoot Interval Shoot
OK OK OK OK