Setting The Sensitivity - Pentax Optio RS1500 Operating Manual

4
Press the 3 button.
The camera returns to capture status.
The appears on the display.
O

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
Auto The sensitivity is automatically adjusted by the camera. (Sensitivity 100 - 800)
100
200
The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
400
800
Higher sensitivity settings use faster shutter speeds in low light
1600
conditions to reduce camera shake, but the image may be affected by
noise.
3200
6400
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The setting is saved.
10/10/2010 10/10/2010
Rec. Mode
1/2
14
Recorded Pixels
M
White Balance AWB
Auto
Focusing Area 100
Sensitivity 200
EV Compensation 400
800
Movie
Cancel
MENU
38 38
14:25 14:25
3
OK
OK
101