Table of Contents
Advertisement
Setting the USB Connection Mode
Set the device to which the camera is connected with the USB cable.
Make sure to set the USB Connection mode before connecting your
camera to the computer. You cannot perform the following setting if the
camera is connected to your computer with the USB cable.
1
Turn your camera on.
2
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
3
Use the four-way controller (23) to select [USB
Connection].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23)
to select [MSC].
6
Press the 4 button.
The setting is saved.
Setting
Sound
Date Adjustment
10/10/2010
World Time
English
Folder Name
MSC
PTP
USB Connection
Cancel
MENU
1/3
7
OK
OK
183
Advertisement
Table of Contents
