Table of Contents
Advertisement
5
Press the 4 button.
The setting is saved.
Depending on the country or region, images may fail to be played back
if the video output format is set differently from the one in use there. If
this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.132
Video output format of each city 1p.204
Adjusting the Brightness of the Display
You can adjust the brightness of the display.
1
Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Brightness
6
Level].
3
Use the four-way controller (45)
to adjust the brightness.
F
G
H
4
Press the 3 button.
The camera returns to A mode or Q mode.
The display appears with the set brightness.
170
Dark
Normal
Bright
Setting
NTSC
Video Out
Brightness Level
5sec.
Power Saving
3min.
Auto Power Off
Reset
Delete all
Exit
Cancel
Cancel
MENU
2/3
Advertisement
Table of Contents
