How To Change Function Settings; Using The Direct Keys - Pentax K-x Operating Manual

How to Change Function Settings

32
Function settings can be changed using the direct keys, the control panel
or the menu.
This section explains the basic ways to change function settings.
1

Using the Direct Keys

In Capture mode, you can set Drive Mode, Flash Mode, White Balance
and Sensitivity by pressing the four-way controller (2345), and set AF
point by pressing the 4 button. (p.78)
Below, how to set the flash mode will be explained as an example.
1
Press the four-way controller (3)
in Capture mode.
The [Flash Mode] screen appears.
2
Use the four-way controller (45)
to select a flash mode.
3
Press the 4 button.
The camera is ready to take a picture.
Flash Mode
Auto Flash Discharge
0.0
MENU
Cancel
OK
OK