Shadow Correction - Pentax K-x Operating Manual

190
• When [Highlight Correction] is set to [On], the minimum sensitivity is set to
ISO 400. If [3. Expanded Sensitivity] in the [A Custom Setting 1] menu (p.81)
is set to [On], the sensitivity is set to ISO 200.
• When Capture mode is set to n (Stage Lighting) or l (Night Snap) of H
(Scene) mode, [Highlight Correction] is fixed to [On].

Shadow Correction

Expands the dynamic range and the light level expressed by the CMOS
sensor and prevents dark areas from occurring.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller (2345) to select [Shadow
Correction] and press the 4 button.
6
The [Shadow Correction] screen appears.
3
Use the four-way controller (45)
to select [Off], [Low], [Medium] or
[High].
4
Press the 4 button.
The camera returns to the control panel.
You can also set Highlight Correction and Shadow Correction in [D-Range
Setting] of the [A Rec. Mode 1] menu (p.79).
Shadow Correction
Off
MENU Cancel OK OK