Pentax K-x Operating Manual page 149

1 Capture Mode
2 Flash Mode
3 Drive Mode
4 White Balance
5 Custom Image
6 Multi-exposure/Digital Filter/
HDR Capture/Cross Processing
7 Number of shots using Multi-
exposure
8 Battery level
9 Temperature warning
10 Change AF point
11 Contrast AF frame
12 Phase Difference AF frame/AF
point
* Indicator 12 (Phase Difference AF frame) is displayed in white during
Live View. When the subject is in focus, a green square frame is
displayed instead. It turns red when the subject is not in focus. It is not
displayed when the focus mode is set to \.
* Indicators 21 and 22 are displayed when [Autofocus Mode] is set to I
and the camera detects person's face(s). (Up to 16 face recognition
frames are displayed on the monitor.)
Available operations
M button
3
Position the subject on the monitor and press the shutter
release button halfway.
The autofocus system operates.
When the focus mode is set to \, turn the focusing ring until the subject
is clearly visible on the focusing screen.
4
Press the shutter release button fully.
The picture is taken.
Enlarges the image to 2, 4, 6 times (when the focus mode
is set to \, enlarges the image to 2, 4, 6, 8, 10 times).
Use the four-way controller (2345) to move the display
area, and press the | (Green) button to return the display
area to the center. (Available only when [Green Button] is
assigned to the | (Green) button in [Green Button] of the
[A Rec. Mode 4] menu (p.179).)
13 EV Compensation
14 Histogram
15 AE lock
16 Shutter speed
17 Aperture value
18 EV bar
19 Sensitivity
20 Remaining image storage
capacity
21 Main face detection frame (Face
Detection AF)
22 Face detection frame (Face
Detection AF)
147
4