This chapter contains information about the product and the Mounting Instructions. Validity of the documentation These Mounting Instructions apply to encoders of the MRP 8181 Dplus series. Prior to using the documentation, check whether the documentation and encoder model match The encoder designation is printed on the ID label.
Have you found any errors or would you like to suggest changes? We are continuously striving to improve our documentation for you. Please help us by sending your suggestions to the following e-mail address: userdoc@heidenhain.de HEIDENHAIN | Mounting Instructions | MRP 8181 Dplus | 02/2024...
Solid contaminants: class 3 Max. pressure dew point: class 4 Bold Identifies elements in figures and illustrations, such as positions, dimensions and worksteps Example: S marks the beginning of the measuring length (ML). HEIDENHAIN | Mounting Instructions | MRP 8181 Dplus | 02/2024...
The information symbol indicates a tip. A tip provides important additional or supplementary information. The book symbol indicates a cross reference. A cross reference leads to external documentation, for example: further documentation from HEIDENHAIN or another supplier. Units and tolerances Unless otherwise specified, the dimensions stated in these Mounting Instructions are given in millimeters.
NOTICE Property damage due to electrical stress Do not engage or disengage any connecting elements while the product is under power Do not touch the contacts of the plug connections HEIDENHAIN | Mounting Instructions | MRP 8181 Dplus | 02/2024...
Page 9
It is essential to observe the safety precautions for handling ESD-sensitive components Never touch connector pins without ensuring proper grounding Wear a grounded ESD wristband when handling the connections of the product HEIDENHAIN | Mounting Instructions | MRP 8181 Dplus | 02/2024...
System accuracy XX xxx Qualitätsprüfbescheinigung Quality Inspection Document ID xxxxxxx-xx SN xxxxxxxx x Quality Inspection Certificate Radial guideway accuracy XX xxx Qualitätsprüfbescheinigung Quality Inspection Document ID xxxxxxx-xx SN xxxxxxxx x HEIDENHAIN | Mounting Instructions | MRP 8181 Dplus | 02/2024...
The mounting surfaces must be clean and free of burrs. Zero position If the zero position is relevant in the application, pay attention to the alignment of the zero position marks during mounting. 0° ± 5° HEIDENHAIN | Mounting Instructions | MRP 8181 Dplus | 02/2024...
For more information on the pin layouts, refer to the Cables and Connectors brochure. www.heidenhain.com/documentation Enter the document ID 1206103 For more information on sources of interference, refer to the Interfaces of HEIDENHAIN Encoders brochure. www.heidenhain.com/documentation Enter the document ID 1078628...
Observe all of the machine manufacturer’s notes on working on the machine, e.g., always disconnect the machine from the power supply Removing the encoder Remove the encoder in the reversed sequence of mounting. Further information: "Mounting", Page 11 HEIDENHAIN | Mounting Instructions | MRP 8181 Dplus | 02/2024...
Page 18
DR. JOHANNES HEIDENHAIN GmbH Dr.-Johannes-Heidenhain-Straße 5 83301 Traunreut, Germany +49 8669 31-0 +49 8669 32-5061 info@heidenhain.de Technical support +49 8669 32-1000 Measuring systems +49 8669 31-3104 service.ms-support@heidenhain.de NC support +49 8669 31-3101 service.nc-support@heidenhain.de NC programming ...
Need help?
Do you have a question about the MRP 8181 Dplus and is the answer not in the manual?
Questions and answers