Parts Identification - Panasonic ES-7109 Operating Instructions Manual

Parts identification


 















 Protective cap
 System outer foil
3 System outer foil release
buttons
4 Foil frame
5 Inner blades
6 Foil frame release buttons
7 Switch lock button
4
 







8 OFF/ON switch
9 LCD panel
 Appliance socket
 Trimmer
 Trimmer handle
 Adaptor (RE7-40)
 Power cord
 Appliance plug
 Self-cleaning recharger
(Referred to as the
"Recharger".)
 Detergent cartridge
 Water tank
 Socket
 Arm
 Water tank cap
Operating environment for the self-cleaning
recharger
Operating temperature: 0-40 °C (3-104 °F)
Operating humidity: Less than 95%
If you use the self-cleaning recharger in temperatures outside the
•
above range, the following problems may occur.
The time it takes to charge the shaver increases.
-
The recharger stops functioning.
-
The lifespan of the rechargeable battery shortens. (Only when
-
you use the recharger in lower temperatures.) In this case, the
indicators on the LCD panel will blink twice every second.
If the plug symbol does not glow initially when the shaver is
•
plugged in, wait for a short while until it does.
Depending on the environment, the shaver may not dry even if
•
you select a course that includes the "Dry" function. In this case,
wipe off any drops of water with a dry cloth.
 Clean lamp
 Dry lamp
 Charge lamp
 Status lamp
 Select button
 Cleaning tray
 Water level