Table of Contents
Advertisement
You can use
buttons below XY on
the display to increase or decrease the
ratio of X and Y simultaneously.
Select Cancel to cancel the settings.
Chapter 3 Loading Documents
for
information on how to load
documents.
Set the document orientation
correctly because if it is different
from the orientation of original
loaded, XY is different and their
reduction or enlargement becomes
different as a result.
5-10: Selecting the Original
See
Orientation (Original Orientation)
details.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
for details.
Enter the X and Y ratios by using
For example, enter Y = 120% and X = 200%.
Load the original in the orientation of Head to Top, or Head to
Left.
Select the corresponding document orientation of the original
loaded.
Select Head to Top or Head to Left.
for
Select Save twice.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
The copies are made according to the ratios specified in Step 4.
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%)
Basic Features
buttons.
4
51
Advertisement
Table of Contents
