Table of Contents
Advertisement
The factory default is No Covers.
Select Cancel to cancel the settings.
Select the same size for paper used
for covers and that use for body
pages.
The factory default tray for cover
paper is Tray 5 (Bypass).
The default can be changed by
using Tools Mode screen.
Auto cannot be selected for Paper
Supply.
Select the same size and orientation
of paper used for covers as those for
the body pages.
The screen on the right has the Tray
6 (High Capacity Feeder) installed.
Select Covers.
Select Front Cover.
Confirm the selection of the tray used for the cover as well as
the tray used for body pages.
When using other trays, select Paper Tray Settings.
(When not changing the tray, proceed to Step 7.)
Select the paper tray to be used and select Save.
Added Features
5-18 Inserting Covers (Covers)
5
121
Advertisement
Table of Contents
