Automatic Reception
Transmit
Manual Reception
Transmit
Substitute Memory Reception
If the recording paper runs out, jams or if the toner
runs out during reception, the machine
automatically starts receiving documents into its
image data memory. Stored documents will be
printed automatically after replenishing the
recording paper, toner or clearing the jam. (See
Notes 1, 2 and 3)
Print Reduction Setting
Transmitted Document
Oversized Document
NOTE
48
Facsimile Features
Receiving Documents
Receive
Receive
Received Document
Reduced to fit
the loaded paper size
(See Note 4)
1. If the memory overflows, the machine will stop receiving and release the communication line.
The document(s) stored in the memory up to that moment will be printed out.
2. If you wish to turn off the substitute reception function, change the setting of Fax Parameter
No. 22 to "Invalid". (See page 111)
3. The machine cannot print the received documents from the Sheet Bypass.
Documents are received automatically.
To receive documents
manually, change the Fax
Parameter No. 17 (Receive
Mode) to "Manual" (See
page 110).
1
MESSAGE IN MEMORY
03%
Automatic Reduction
Based on the document length, your machine will automatically
calculate the suitable reduction ratio (70% to 100%).
Set Parameter No. 24 (Print Reduction) to "Auto".
(See page 111)
Fixed Reduction
Pre-determine the reduction ratio from 70% to 100% in 1%
increments.
a) Set Parameter No. 24 (Print Reduction) to "Fixed".
b) Set Parameter No. 25 (Reduction Ratio). (See page 111)
1
Rings
When the machine completes
the memory reception and
there is no recording paper or
toner, this error message
appears on the display.