Changing The Network Settings - Panasonic SC-PTX7 Operating Instructions Manual

Changing the network settings

HDD
CANCEL
STOP
MENU PLAYLIST
ENERGETIC
HDDREC
PLAYMODE
SETUP SETUP
These settings are used if you will connect this unit to a
network.
Preparation
1 To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
2 Press [Í].
Common procedures
1
Press [SETUP].
2
Press [3 4] to select "Other Setup" and press [ENTER].
3
Press [3 4] to select "Network" and press [1].
4
Press [3 4] to select "Network Settings" and press
[ENTER].
The network connection status is displayed.
Manually setting the IP address
In most cases, default settings can normally be used without
making any changes.
When connecting this unit to a network and assigning a fixed
IP address, perform the following settings.
After performing steps 1–4 (➜ above)
5
Press [3 4] to select "TCP/IP 1" and press [ENTER].
6
Press [3 4] to select "IP Manual Setting" and press
[ENTER].
7
Press [3 4] to select the item to be set and press
[ENTER].
8
Enter numbers with the numbered buttons and press
[ENTER].
≥After checking the specifications for your broadband
router, enter each number.
≥The numeric input range is between 0 and 255.
BAND
SELECT
VOLUME
PAUSE PLAY
FUNCTIONS
MELLOW RELAXING EMOTIONAL
CH SELECT FAVORITE 2 ND
REG SELECT
FL DISPLAY SLEEP VS
SOUND SELECT MUTING
Network Settings
TCP/IP 1
Auto Setting
TCP/IP 2
Auto Setting
IP Address
Connected to network.
IP Manual Setting
IP Address 0. 0. 0. 0
Subnet Mask 0. 0. 0. 0
Gateway 0. 0. 0. 0
Repeat steps 7–8, and enter numbers for other items.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
If you made an input mistake
Move the cursor with [2 1] and make corrections with the
numbered buttons.
To delete settings and use default settings
Select "IP Auto Setting" in step 6 and press [ENTER].
Manually setting the DNS server
In most cases, default settings can normally be used without
making any changes.
When setting an assigned DNS server from your ISP, perform
the following settings.
After performing steps 1–4 (➜ left)
5
Press [3 4] to select "TCP/IP 2" and press [ENTER].
6
Press [3 4] to select "DNS Manual Setting" and
press [ENTER].
≥If "TCP/IP 1" is set to "IP Manual Setting", the "DNS Auto
Setting" will not be displayed.
7
Press [3 4] to select the item to be set and press
[ENTER].
8
Enter numbers with the numbered buttons and press
[ENTER].
≥Follow the instructions given by your ISP and enter the
numbers.
≥The numeric input range is between 0 and 255.
Repeat steps 7–8, and enter numbers for other items.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
If you made an input mistake
Move the cursor with [2 1] and make corrections with the
numbered buttons.
To delete settings and use default settings
Select "DNS Auto Setting" in step 6 and press [ENTER].
To check the IP Address, etc.
After performing steps 1–4 (➜ left)
5
Press [3 4] to select "IP Address" and press [ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
DNS Manual Setting
Primary DNS Address 0. 0. 0. 0
Secondary DNS Address 0. 0. 0. 0
IP Address
[MAC Address] 00-00-00-00-00-00
[IP Address] ---.---.---.---
[Subnet Mask] ---.---.---.---
[Gateway] ---.---.---.---
[Primary DNS Address] ---.---.---.---
[Secondary DNS Address] ---.---.---.---
95