Using The Fm/Am Radio; Manual Tuning; Setting Preset Channels - Panasonic SC-PTX7 Operating Instructions Manual

Using the FM/AM radio

MUSIC PORT
Radio operations are described mainly with the remote control.
You can alternatively use the corresponding button on the main
unit.
§1 [O N SELECTOR]

Manual tuning

1
Press [TUNER/BAND]
2
Press [6 5] to select the frequency.
DISC SFC TG
PL PRG
D DTS
MODE
CD
RDS
DVD
PS AC
PTY A
When a stereo broadcast is being received, "ST" lights in
the display.
≥To start automatic tuning, press and hold [6 5] until
the frequency starts scrolling. Tuning stops when a station
is found.
∫ If noise is excessive
When "FM" is selected
Preparation
To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
1 Press [SUB MENU].
2 Press [3 4] to select "Audio Mode" and press [ENTER].
3 Press [3 4] to select "Mono" and press [ENTER].
≥"MONO" (monaural) lights up in the display.
≥This should normally be set to "Auto(Stereo)".
When "AM" is selected
1 Press [PLAY MODE].
Each time you press the button:
BP1 (.BP2 (BP=Beat Proof)
2 Select "BP1" or "BP2" that receives good reception.
62
HDD BAND BAND
SELECT
VOLUME
CANCEL CANCEL
STOP PAUSE PLAY
MENU PLAYLIST MENU PLAYLIST FUNCTIONS
ENERGETIC MELLOW RELAXING EMOTIONAL
HDDREC CH SELECT CH SELECT FAVORITE 2 ND
REG SELECT
PLAYMODE PLAYMODE FL DISPLAY SLEEP VS
SETUP SOUND SELECT MUTING
1 0 SELECTOR
TUNING
OPEN/CLOSE SELECTOR 
 
TUNING
§2 [X TUNING W]
§1
to select "FM" or "AM".
D.MIX MONO SLP ST CT
SRD E.
HDCD
H.BASS
PGM
W
1 2
RND
∫ FM frequency step
The step is factory-set to 0.2-MHz (200-kHz), but you can
change it to receive broadcasts allocated in 0.1-MHz (100-kHz)
steps.
Preparation
To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
1 Press [TUNER/BAND]
2 Press [SUB MENU].
3 Press [3 4] to select "Select Frequency Step" and press
[ENTER].
4 Press [3 4] to select the frequency step and press
[ENTER].
5 Press [2, 1] to select "Yes" and press [ENTER].
[Note]
After changing the setting, previously preset frequencies will
be cleared and the timer setting of FM recording will be
canceled. Preset them again.
To return to the previous screen
Press [RETURN].
VOLUME

Setting preset channels

Up to 30 stations can be set in each band, FM and AM.
Preparation
To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
1
Press [TUNER/BAND]
2
Press [6 5] to select the frequency.
3
Press [SUB MENU].
4
Press [3 4] to select "Set Preset Channel" and press
[ENTER].
5
Press [3 4] to select the channel and press [ENTER].
Repeat steps 2–5 to set other channels.
To return to the previous screen
Press [RETURN].
§1
to select "FM".
§1
to select "FM" or "AM".
FM Sub Menu
Audio Mode Auto(Stereo)
Set Preset Channel
Erase Preset Channel
Recording Mode LPCM
Auto Track Divide Auto 5 Minutes
FM Set Preset Channel
CH1 88.1 MHz
CH2 88.5 MHz
CH3 88.7 MHz
CH4 - - .- MHz
CH5 - - .- MHz
Set Preset CH.
Preset: CH4
Frequency: 89.9 MHz