Func 1; Control Key; Using The Shutter Function; Changing The Display Language - Panasonic PT-L520U Operating Instructions Manual

FUNC 1

F U N C 1 I N D E X
[
K E Y S T O N E
This assigns a function to the FUNC1
button of the remote control unit .
INDEX
B Functions in the same way as the
INDEX WINDOW function. (page
43)
KEYSTONE
B Functions in the same way as
when "KEYSTONE" is selected
from the MAIN MENU screen.
(page 33)

Using the shutter function

The shutter function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in shutter mode than it does in
normal projection mode.
# Press the SHUTTER button on the remote control unit.
You can also select SHUTTER from the MAIN MENU screen and then
press the ENTER button.
$ Press any button on either the projector or remote control unit to
return to normal operating mode.

Changing the display language

Use the F and G buttons on the projector or remote control unit to select a
language, then press the ENTER button to accept the setting.
L A N G U A G E E N G L I S H
E N G L I S H
D E U T S C H
F R A N Ç A I S
E S P A Ñ O L
I T A L I A N O
S E L E C T E N T E R E S C
42

CONTROL KEY

C O N T R O L K E Y O N
[
O F F
To make the buttons on the
projector not function, set
CONTROL KEY to OFF.
To use the buttons on the projector,
set to ON. (page 14)
Indicates the language which is
currently set

Using the INDEX WINDOW function

This function lets you store a picture which is being projected into memory,
so that you can display a still picture and a moving picture on the screen.
Select INDEX from the FUNC1 item in the OPTION2 menu to use this
function. (Refer to page 42.)
# Press the FUNC1 button.
You can also select INDEX WINDOW from
the MAIN MENU screen and then press the
ENTER button.
NOTE:
B The aspect ratio of the screen changes and
the image is vertically elongated in
comparison to a normal image.
$ Use the F and G buttons to select a screen size.
When the screen size is changed, the picture's aspect ratio will also change.
Still
Still Moving
picture picture picture
NOTE:
B Make sure that you fully understand the notes on ASPECT which are
given on page 38 before using the index window function.
% Use the I I and H H buttons to switch between the still picture screen
and moving picture screen.
Still Moving
picture picture
& Press the ENTER button to capture the present moving picture in a
still window.
NOTE:
B When steps $ and % are carried out, the present moving picture will be
captured in a still window also.
B When the input signal is changed, this function will be cancelled.
Still Moving
picture picture
Still Moving
Moving
picture
picture picture
Moving Still
picture picture
43