Using WebBrowser
Detailed settings window
You can make detail network settings on projector, when connecting without the administrator authority or when connecting
through an access point (infrastructure mode).
LAN settings
1
Click [Detailed set up] in the menu.
2
Select the items to change and click [Next].
The settings window appears, showing the current settings.
• To change the LAN settings, click [Change].
• To return to the previous window, click [Back].
Settings in this page are the same when setting [USER 1] -
[USER 3] from network menu of the projector. (See page 54)
3
Complete the detailed settings and click
[Next].
When [Next] is clicked, the next page appears, enabling you to
complete the detailed settings as desired.
After all required items have been entered, a confirmation
window appears.
4
Click [Submit].
The settings will be registered.
Making the above settings effective
Select [WIRELESS LAN] in the network menu of the projector, and use the [
page.
• Important video/audio data is protected because AES
even if [ENCRYPTION] is set to [NONE]. ※ "Glossary" (See page 72)
• If you have changed the LAN settings that are currently in use, the connection may break off.
(cont.)
encryption processing takes place in advance for all network numbers,
※
65
] buttons to select the network set in this