Connecting With Wired Lan - Panasonic PT-F100NT Network Manual

Connecting with Wired LAN

Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing
any settings.
A Projector settings
1
Turn on the projector and press the [NETWORK] button on the remote control.
2
Press the menu button to open the [NETWORK] menu, select [Wired LAN] and then
press [OK].
3
Set the details of network and select [ENTER].
As for network setting items, see page 53.
Confirm to your system administrator before changing any settings.
B Computer settings
4
Turn on the computer.
5
Make the network setting according to your system administrator.
If the projector settings are the default settings (See page 56), then the computer can be used with the following network
settings.
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
6
Launch Wireless Manager ME 5.5
When the <Network Adapter Selection> window appears
A Click [Wired LAN].
B Select the adapter from the list and click [OK].
7
Select a projector you want to connect on the <Projector Search> window ([S-MAP]
or [1-4/U]), and click [Connect]. (See pages 18, 19)
When the connection with the projector is established, the launcher appears.
("Description of the launcher" → See page 33)
If no projector is displayed, click [
192.168.11.101
255.255.255.0
192.168.11.1
] to start searching by IP address. (See page 30)
28