Connecting With Wireless Lan; Preparations; Easy Wireless Set Up; Parts Name In Search Screen - Panasonic PT-F100NT Network Manual

Connecting with wireless LAN

Preparations

Make sure or prepare for the following items:
A The wireless LAN adapter is recognized. (See page 73)
• The wireless LAN adapter you want to use is enabled. (Otherwise, enable it.)
• Make sure the power supply for the wireless LAN adapter is turned on; the hardware switch or the software setting might
have turned it off.
B W hen using it via the infrastructure connection: Make sure the network setting for the projector has been done by the
administrator. (For detailed information, refer to [USER] setting on page 54.)
C I f you log in with [User authority], select a projector network number from [USER1] to [USER3]. (For detailed information, refer
to [USER] setting on page 54.)

Easy Wireless Set Up

There are 3 different connection methods, "S-MAP" (Projector Signal Map) Connection, "1-4/U" Connection, and "PC Search"
Connection.
These connections enable easy search and connection to the projector.
(Refer to "1-4/U" connection on page 19 to establish an easy wireless connection with projectors that have no S-MAP function.)
• [S-MAP] Connection:
• [1-4/U] Connection:
• [PC Search] Connection: Use the [Computer search] function on the projector to search and connect (see page 20).

Parts name in search screen

n <Projector Search> window – [S-MAP] (See page 18)
Current settings
A
Weak
↑
Signal strength level
↓
Strong
A Setting menu display
Choose to display or hide the B to F buttons
B Access Devices (See page 35, 41, 43)
When only one projector is connected, select [
multiple projectors are connected, select [
※ Multiple projectors [(Multiple projectors icon)] are
available when "1-4/U" is selected.
C S-MAP (See page 18)
Display <Projector Search> window – [S-MAP].
D 1-4/U (See page 19)
Display <Projector Search> window – [1-4/U].
E PC Search (See page 20)
Display <PC Search> window.
F Other search (See page 30)
From the projectors that are currently switched on, search
for the projector of specified IP address, domain name,
and ID.
Search and connect to the projectors set up using [Network Number] [S-MAP] (see page 54).
Connectable projectors are displayed in order of wireless reception strength. (see page 18).
Operation is performed in [S-MAP] or [S-MAP] (list display) view on the <Projector Search> window.
Search and connect to the projectors set up using [Network Number] [1]-[4] or [USER1]-[USER3].
Projectors that can be connected to are displayed in a list (see page 19).
Operation is performed in [1-4/U] view on the <Projector Search> window.
B C
Current
]. When
].
D E F
G Updates the list of found projectors.
H Switching Display Window
: <Projector Search> window – [S-MAP] is displayed.
(Upper figure)
: <Projector Search> window – [S-MAP] (list display)
is displayed. (See page 16)
I Found projectors
• Projector found on a wired LAN
• Projector found using [U (user)]
• Projectors searched by a network number of 1 to 4.
J Projectors searched and found by S-MAP.
The name and ID of projectors are displayed.
represents the projectors that were searched and
found through wired LAN.
represents the projectors that were searched and
found through wireless LAN.
15
G
H
I
J
Scrollbar