Time Settings; Email Settings; Connection Test - Panasonic PT-F100NT Network Manual

Using WebBrowser

Time settings

Click [Detailed set up]→[Adjust clock] in the menu.
Time zone
Time

Email settings

You can specify two email recipients.
Click [Detailed set up]→[E-mail set up] in the menu.
• [MAIL SERVER]
ENABLE
SMTP SERVER NAME
• [MAIL OPTION]
MAIL FROM
MEMO
• [TEMPERATURE WARNING SET UP]
MINIMUM TIME
INPUT AIR TEMPERATURE: Select the temperature of the intake
• [E-MAIL ADDRESS]
E-MAIL ADDRESS
MAIL CONTENTS
ERROR
LAMP RUNTIME
FILTER REMAINING TIME : Select ON to send email when "at REMAIN" is reached.
INPUT AIR TEMPERATURE: Select ON to send email when the temperature set in [TEMPERATURE WARNING SET UP] is
PERIODIC REPORT
When [submit] is clicked, the settings are applied.

Connection test

You can confirm if a network connection is established with Mail server,
POP server, DNS server or the like.
Click [Detailed setup] → [Ping test] from the network main menu.
Destination IP address: Enter the IP address of the server you want to
test, and then click [Submit].
If succeeded in connection, the following display appears.
If failed in connection, the following display appears.
(cont.)
: Select the time zone and click [Set
time zone].
: Enter the current date and time in
[Date] and [Time], and then click [Set
date and time].
: Enable or disable email transmission.
: Enter the SMTP server name.
: Enter the sender's email address.
: Enter a description of the sender.
: Enter the interval for sending email.
sensor at which to send a warning
message.
: Enter the email addresses of the
recipients.
: Change the type of message as desired.
When sending messages to mobile phones, select "SIMPLE."
: Select ON to send email when errors occur.
: Select ON to send email when "at REMAIN" is reached.
exceeded.
: Send a message with the projector status at the selected date and time.
66