S-Map" Connection - Panasonic PT-F100NT Network Manual

Connecting with wireless LAN

"S-MAP" Connection

1
Click [ ] on the desktop.
Alternatively, select [Start] → [All Programs] → [Panasonic Wireless Display] →
[Wireless Manager mobile edition 5.5].
<Projector Search> window – [S-MAP] is displayed. (Parts name → See page 15)
● When the <Input User Name> window appears
Set the icon and user name, and click [OK].
• The icon and user name are set when Wireless Manager mobile edition 5.5 is first launched.
• The icon and user name settings can be changed in the <Option> window. (See page 51)
2
Select and click the icon [
( represents the projectors that were searched and found through wired LAN, while
through wireless LAN.)
The Connect/Connectability menu is displayed.
For List Display, [
(In list view, select a projector you want to connect from the list and press [Connect].)
<
Projector Search> Window – [S-MAP]
Current setting [Single] - [S-MAP]
Setting
Select access port
Name6789
Proj6789
Name1234
Proj1234
AAAABBB
PRJ02555
Connect
Connectability
Cancel
Name8833
Proj8833
3
Select and click [Connect].
● If the <Confirmation Dialog> box is displayed
Click [Yes(Y)].
● When the <Network Adapter Selection> window appears
Select the adaptor and click [OK].
If the <Confirmation Dialog> box is displayed, click [YES (Y)].
• For details on how to connect, refer to page 29.
• Refer to the models on page 48 supporting the wired LAN that is compatible with this software.
• If you want to enable the network adapter after starting the Wireless Manager, you should do it
after exiting the Wireless Manager.
4
Connection completed.
When the connection with the projector is established, the launcher
appears. ("Description of the launcher"→ See page 33)
• The "Signal strength level" is just a guide. As differences occur due to conditions such as the communication
environment, this does not always display accurate values.
• Enter the user name in up to 8 alphanumerics.
• The launcher is not projected on the projector. However, if you are using Windows Vista, the installed launcher is
projected.
• If you cannot connect the projector and computer using Easy Wireless Setup (See page 73).
• If you do not find a projector you want to connect, press [Update] button.
• When a firewall is active, a window may open prompting to deactivate a network block. (See screen A on page 76.)
• When a network connection is established by using the connection utility, a window may open prompting to halt the
connection utility. (See screen B on page 77.)
] of the projector you want to connect to.
] is displayed in the selected projector.
Update
PCSearch
Name2345 Name2212
Proj2345 Proj2212
Name6679 Name7771
Proj6679 Proj7771
Close
(cont.)
<
Projector Search> Window – [S-MAP] (List display)
Current setting [Single] - [S-MAP]
Setting
Select access port
18
indicates those found
Update
PCSearch
Live Mode Standby
Connectability Connect Close