URBAN OUTFITTERS Bloom Storage Cabinet Assembly Instructions

Bloom Storage Cabinet
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
#2 Phillips head screwdriver, Pencil
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
(A) Screw JP
(#8 x 3/4") x2
(F) Knob
x2
02.13.2024 REV 2
(B) Screw JP (C) Plastic Anchor
(#8 x 2") x2
(G) Bolt JP (H) Storage x1
(#4 x 35mm) x2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
(D) Tipping Restrain
(S6) x2
(E) Bracket
x2 x4
Page 1 of 3