Setting The White Balance Manually (White Set) - Panasonic Lumix DMC-FZ10 Operating Instructions Manual

Setting the White Balance manually (White set)

Preparation
• Set the mode dial except for [
1
Select [W.BALANCE] and set to
[ ].
1
/
REC
4
W.BALANCE
PICT.SIZE
QUALITY
SPOT MODE
SELECT SET
WB
MENU
SET
2
(Only when setting the white
balance again) Press 1.
3
Aim the camera at a sheet of white
paper 1 or similar object so that it
completely fills the frame to white
on the screen and press the
shutter button fully.
• Close the menu by pressing the
[MENU] button after finishing the
setting.
Recording pictures (advanced)
]/[ ]. (P30)
¬ Suggestions/Tips ¬
• When setting the white balance to the
SETUP
• The setting of the white balance is
WB
2304
• In Motion image mode [
OFF
• When taking a picture with the flash,
EXIT
MENU
WB
SET
69
mode except for [AUTO], you can
finely adjust the white balance. (P70)
applied to the other recording modes.
balance is fixed to [AUTO].
the white balance will be automatically
adjusted [except for [
and [ WB ] (Flash)], but the white
balance may not be properly adjusted
when the photo flash is insufficient.
], the white
] (Daylight)