Connecting To A Pc (Ptp) - Panasonic Lumix DMC-FZ10 Operating Instructions Manual

Connecting to a PC (PTP)

Do not follow the setting below on the OS except for Windows XP and Mac OS X.
1
Turn the camera on and then set
[USB MODE] to [PTP]. (P107)
2
Connect the camera to a PC via
the USB connection cable
(supplied).
ACCESS
[Windows]
The camera icon appears on the
[My Computer] folder.
• If it is the first time for you to
connect the camera to a PC, the
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then the camera
icon appears on the [My Computer]
folder.
Playback (advanced)
A/V
OUT
USB
110
[Macintosh]
You can read pictures with image
capture or iPhoto.
¬ Suggestions/Tips ¬
• Refer to P108 carefully when
connecting to the OS except for
Windows XP and Mac OS X with
setting [USB MODE] to [PTP].
• When connecting to a PC, we
recommend using the AC adaptor as
the power source.
• If the remaining battery power
becomes low during communication,
the power indicator blinks and the
alarm beeps. In this case, stop the
communication. Then turn the camera
off and charge the battery.
• When connecting to a PC, pictures
and sounds are not output from the
[A/V OUT] socket.
• It may take time to display the
communication screen depending on
the PC.