Connecting To A Pc (Mass Storage) - Panasonic Lumix DMC-FZ10 Operating Instructions Manual

Connecting to a PC (Mass Storage)

A/V
OUT
USB
1
Turn the camera on and then set
[USB MODE] to [Mass Storage].
(P107)
2
Connect the camera to a PC via
the USB connection cable
(supplied).
ACCESS
[Windows]
The drive appears on the
[My Computer] folder.
• If it is the first time for you to
connect the camera to a PC, the
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then it appears on
the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
Playback (advanced)
¬ Suggestions/Tips ¬
• When connecting to a PC, we
recommend using the AC adaptor as
the power source.
• If the remaining battery power
becomes low during communication,
the power indicator blinks and the
alarm beeps. In this case, stop the
communication. Then turn the camera
off and charge the battery.
• When connecting to a PC, pictures
and sounds are not output from the
[A/V OUT] socket.
• Use the supplied USB connection
cable only.
109