Finely Adjusting The White Balance - Panasonic Lumix DMC-FZ10 Operating Instructions Manual

Finely Adjusting the White Balance

If you cannot acquire the desirable hue with white balance because of too many
different light sources, etc., adjust the fine white balance as follows.
Preparation
• Set the mode dial except for [
• Set the white balance to [
1
Press 3 until [
appears.
WB ADJUST.
RED
SELECT
WB
SET
Recording pictures (advanced)
]/[ ]. (P30)
]/[ ]/[ ]/[
2
WB ADJUST.]
BLUE
EXIT
¬ Suggestions/Tips ¬
• The white balance icon turns red or
• You can set the value independently
• When you set the white balance using
• The adjusted picture will be close,
70
WB ]/[ ]. (P67)
Adjust the white balance.
WB ADJUST.
RED
SELECT
WB
SET
• 1 [BLUE]: Press when the hue is
reddish.
• 2 [RED]: Press when the hue is
bluish.
• Close the function by pressing 4
after finishing the adjustment.
blue.
for each of the modes in white
balance.
the White set [ ], the adjustment
level is set to "0".
though may not be identical to the
actual picture.
BLUE
EXIT