Setting The White Balance Manually (White Set) - Panasonic Lumix DMC-LC50 Operating Instructions Manual

Setting the White Balance manually (White set)

Preparation
• Set the mode dial except for [
1
Select [W.BALANCE] and set to
[ ].
1
/
REC
3
W.BALANCE
AUTO
SENSITIVITY
PICT.SIZE
QUALITY
SELECT SET
WB
2
(Only when setting the white
balance again) Press 1.
3
Aim the camera at a sheet of white
paper 1 or similar object so that it
completely fills the frame to white
on the screen and press 4.
• Close the menu by pressing the
[MENU] button after finishing the
setting.
Recording pictures (advanced)
]/[ ]. (P29)
SETUP
AUTO
1600
EXIT
MENU
WB
61
Use of auto white balance adjustment in
inappropriate lighting conditions may
result in reddish or bluish pictures.
Where the subject is surrounded by
many light sources, auto white balance
adjustment may not operate properly.
In this case, set the white balance to a
mode except [AUTO] manually.
1 The range that is controlled by the
auto white balance adjustment
mode of this camera
2 Blue sky
3 Cloudy sky (Rain)
4 TV screen
5 Sunlight
6 White fluorescent light
7 Incandescent light bulb
8 Sunrise and sunset
9 Candlelight
1)
KlKelvin Color Temperature
2)
3)
4)
5)
6)
7)
8)
9)