Panasonic Lumix DMC-FX580 Operating Instructions Manual page 85

∫ Operations performed during
1
Display control panel by touching screen.
• If no operation is done for 2 seconds, it will return to original status.
A Control panel
2
Operate control panel by touching.
t

∫ Changing the slide show settings
You can change the settings for [EFFECT] and [MUSIC]. during the
slide show playback on the slide show set screen.
[EFFECT]
This allows you to select the screen effect when switching from one
picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF]
• When [URBAN] has been selected, the picture may appear in black and
white as a screen effect.
[MUSIC]
The following music can be selected to play during slide show playback:
[NATURAL], [SLOW], [SWING], [URBAN], [OFF]
• [ ] ([AUTO]) can be used only if [CATEGORY] is selected. It will be played back with [EFFECT] and
[MUSIC] set for each category automatically.
• Preview screen is displayed when [PREVIEW] is touched. Touch [CANCEL] to cancel the preview.
• [MUSIC] with the same name will be set for the selected [EFFECT]. Select [MUSIC] after selecting [EFFECT].
[SET]
[DURATION] or [REPEAT] etc. can be set.
Item
[DURATION]
[REPEAT]
[AUDIO]
• [DURATION] can be set only when [EFFECT] is set to [OFF].
• [AUDIO] will be displayed only when the [MUSIC] is set to [OFF]. Audio will be played along with the still
picture with audio by setting the [AUDIO] to [ON].
Note
• It is not possible to add new music effects.
slide show
A Back to previous picture
B Play/Pause
C Ahead to next picture
CANCEL
D Return to slide show set screen
E Reduce volume level
u

F Increase volume level
EXIT
G Exit slide show
¢ These operations can be performed only in the Pause
1SEC/2SEC/3SEC/5SEC
ON/OFF
ON/OFF
¢
Mode.
Slide show set screen
Settings
Advanced (Playback)
A
¢
VQT1Y62
85