[Stabilizer]; [Min. Shtr Speed] - Panasonic Lumix DMC-FX580 Operating Instructions Manual

Advanced (Recording pictures)
Note
• When you take pictures in dark places, picture noise may become noticeable. If picture noise
becomes a problem, we recommend that you take pictures after increasing the setting for
[NOISE REDUCTION] or lowering the setting for each of the items other than
[NOISE REDUCTION].
For details on [REC] mode menu settings, refer to P21.
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates for the jitter, enabling jitter-free images to be taken.
Applicable modes:
[OFF]
[AUTO]: The optimum jitter compensation is selected depending on the condition.
[MODE1]: Jitter is always compensated during [REC] mode.
[MODE2]: The jitter is compensated for when the shutter button is pressed.
Note
• The stabilizer function may not be effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
• The setting is fixed to [MODE2] with [SELF PORTRAIT] in Scene Mode and to [OFF] in
[STARRY SKY] in Scene Mode.
• The setting is fixed to [MODE1] in Motion Picture Mode.
For details on [REC] mode menu settings, refer to P21.
You can take a picture brightly in dark places by setting [MIN. SHTR SPEED] slower. Also,
you can set it faster to reduce the blur of the subject.
Applicable modes:
[1/250]/[1/125]/[1/60]/[1/30]/[1/15]/[1/8]/[1/4]/[1/2]/[1]
Minimum shutter speed setting
Brightness
Note
• This should usually be set to [1/8 ] to take pictures. (When you select a minimum shutter speed
other than [1/8 ], [
• Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
• Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend
recording the picture in well-lit area. If correct exposure cannot be achieved, [
red when the shutter button is pressed halfway.
• The setting is not available when [INTELLIGENT ISO] is being used.
82
VQT1Y62
³±´²

[MIN. SHTR SPEED]

³
Jitter
] appears on the screen.)

[STABILIZER]

¿
1/250
Darker
Less
1
Brighter
More
] will flash in