[Face Recog.] - Panasonic Lumix DMC-FX580 Operating Instructions Manual

• If you finely adjust the white balance to A (amber), the white balance icon on the LCD
monitor will change to orange. If you finely adjust the white balance to B (blue), the white
balance icon on the LCD monitor will change to blue.
• If you finely adjust the white balance to G_ (green) or M` (magenta), [_] (green) or [`]
(magenta) appears beside the white balance icon on the LCD monitor.
• Select the center point if you are not finely adjusting the white balance.
• You can finely adjust the white balance independently for each white balance item.
• The white balance fine adjustment setting is reflected in the picture when using the flash.
• The white balance fine adjustment setting is memorized even if the camera is turned off.
• The white balance fine adjustment level returns to the standard setting (center point) in
the following cases.
– When you reset the white balance in [
– When you reset the color temperature manually in [
• White balance fine adjustment cannot be set for [B/W], [SEPIA], [COOL] and [WARM] in
[COLOR EFFECT].
∫ Auto white balance
Depending on the conditions prevailing when pictures are taken, the pictures may take on
a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being
used or there is nothing with a color close to white, auto white balance may not function
properly. In a case like this, set the white balance to a mode other than [AWB].
1 Auto white balance will work within this range.
2 Blue sky
3 Cloudy sky (Rain)
4 Shade
5 TV screen
6 Sunlight
7 White fluorescent light
8 Incandescent light bulb
9 Sunrise and sunset
10 Candlelight
KlKelvin Color Temperature
∫ Setting the color temperature
You can set the color temperature manually for taking natural pictures
in different lighting conditions. The color of light is measured as a
number in degrees Kelvin. As the color temperature becomes high the
picture becomes bluish and as the color temperature becomes low the
picture becomes reddish.
1
] and then press 1.
Select [
2
Touch the color temperature setting bar.
• It is also possible to set the values by touching [ 3 ]/[ 4 ] or pressing 3 / 4 of the cursor button.
• You can set a color temperature from [2500K] to [10000K].
3
Touch [SET].
For details on [REC] mode menu settings, refer to P21.
Specify a person's face and use the face recognition functions.
Applicable modes:
[OFF]/[ON]/[SET]
Note
• Refer to P67 for details.

[FACE RECOG.]

ñ³±´²
Ò
]
¿
Advanced (Recording pictures)
]
2)
3)
4)
6)
1)
7)
8)
9)
10)
5)
77
VQT1Y62