[I.exposure]; [Burst] - Panasonic Lumix DMC-FX580 Operating Instructions Manual

Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P21.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
• When it is set to [LOW], [STANDARD] or [HIGH], [
• Even when the [SENSITIVITY] is set to [ISO80]/[ISO100], [SENSITIVITY] may be set higher
than [ISO80]/[ISO100] if the picture is taken with [I.EXPOSURE] set to valid.
• Compensation effect may not be achieved depending on the conditions.
• [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
For details on [REC] mode menu settings, refer to P21.
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Applicable modes:
Burst speed (pictures/
second)
Number of
recordable
pictures
¢ The burst speed is constant regardless of the transfer speed of the card.
• The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the flash is not activated.
Note
• When the Burst Mode setting is set to Unlimited
– The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
– You can take pictures until the capacity of the built-in memory or the card is full.
• The focus is fixed when the first picture is taken.
• When the burst speed is set to [
used for the first picture for the subsequent pictures as well. When the burst speed is set to
ò
[ ], they are adjusted each time you take a picture.
• When the self-timer is used, the number of recordable pictures in Burst Mode is fixed to 3.
• If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
• The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high, etc.
• Burst Mode is not canceled when the camera is switched off.
• If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture data.
• [Œ] is set for the flash when burst is set.
• Auto bracket/color bracket is canceled when burst is set.
• Burst cannot be used in [TRANSFORM], [PANORAMA ASSIST], [HI-SPEED BURST],
[FLASH BURST], [STARRY SKY], [PIN HOLE] or [FILM GRAIN] in Scene Mode.
80
VQT1Y62

[I.EXPOSURE]

³±´²
˜ [BURST]
ñ³±´²
[OFF]
—
A
—
›
—
˜
], the exposure and white balance are fixed at the settings
] is displayed on the screen.
¿
˜
¢
approx. 2.3
max. 3
max. 5
ò
approx. 1.8
Depends on the
remaining capacity of the
built-in memory/card.