Af [Af Mode] - Panasonic Lumix DMC-FX580 Operating Instructions Manual

Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P21.
This allows the focusing method that suits the positions and number of the subjects to be selected.
Applicable modes:
[š]: Face detection
[ ]: 11-area-focusing
[ƒ]: 1-area-focusing
(High speed)
[Ø]: 1-area-focusing
[Ù]: Spot-focusing
Note
• The camera is focusing on all the AF areas when multiple AF areas (max. 11 areas) light at the
same time in [
mode to [ƒ], [Ø] or [Ù].
• If the AF mode is set to [
• Switch the AF mode to [ƒ] or [Ø] if it is difficult to focus using [Ù].
• The camera may detect the subjects other than a person as the face. In this case, switch the
AF mode to any modes other than [š] and then take a picture.
• It will be fixed to [
• The AF mode cannot be set in [FIREWORKS] in Scene Mode.
• It is not possible to set [
– In [PANORAMA ASSIST], [NIGHT SCENERY], [FOOD], [STARRY SKY] and
[AERIAL PHOTO] in Scene Mode.
∫ About [š]
The following AF area frames are displayed when the camera detects the faces.
Yellow:
When the shutter button is pressed halfway, the frame turns green when
the camera is focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance
away as faces within the yellow AF areas are also focused.
• Under certain picture-taking conditions including the following cases, the facial recognition
function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [
– When the face is not facing the camera
– When the face is at an angle
– When the face is extremely bright or dark
– When there is little contrast on the faces
– When the facial features are hidden behind sunglasses, etc.
– When the face appears small on the screen
– When there is rapid movement
– When the subject is other than a human being
– When the camera is shaking
– When digital zoom is used
78
VQT1Y62
³±´²
The camera automatically detects the person's face. The focus
and exposure can then be adjusted to fit the face no matter
what portion of the picture it is in. (max. 15 areas)
The camera focuses on any of 11 focus areas. This is effective
when the subject is not in the center of the screen.
The camera quickly focuses on the subject in the AF area on
the center of the screen.
The camera focuses on the subject in the AF area on the
center of the screen.
The camera focuses on a limited narrow area in the screen.
]. If you want to determine the focus position to take pictures, switch the AF
], the AF area is not displayed until the picture is brought into focus.
š
] when the [FACE RECOG.] is set to [ON].
š
] in the following cases.
[AF MODE]
AF
¿
].