Pictbridge; This Is For Printing Pictures By Directly; Connecting To The Printer - Panasonic SDR-S150 Operating Instructions Manual

DPOF setting (continued)
∫ What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to
be written onto an SD card so that it can be used on a system supporting DPOF.
≥ The DPOF setting can be established for up to 999 scenes.
≥ DPOF setting made on another camera may not be recognized by this unit. Please
perform the DPOF settings on this unit.
≥ You cannot add the recording date to pictures to be printed with the DPOF settings.
≥ If the write protection switch on an SD card is set to [LOCK], the DPOF setting cannot
be set. (P16)

PictBridge

This is for printing pictures by directly connecting to the printer.
To print pictures by directly connecting this unit to the printer, use a printer compatible
with PictBridge. (Read the operating instructions for the printer.)
¬ Connect this unit to the AC adaptor.
¬ Rotate the mode dial to select
1
1
PictBridge
SETUP ENTER
70
VQT0X39
Open the terminal cover, then firmly
plug one end of the USB cable 1
(supplied) into the unit's USB terminal
and the other end into the terminal on
the printer.
Insert the plugs as far as they will go.
The images recorded on the SD card are
displayed as thumbnails.
≥ When no SD card is inserted in this unit, the
1/24 1/24 1/24
≥ When this unit and the printer are not
≥ Do not use any other USB cables except the
.
[ ] indication does not appear. (You
PictBridge
cannot print any pictures.)
connected properly, the [
keeps blinking. (It will blink for over
approx. 1 minute.) Connect the cable or check
the printer.
supplied one. (Operation is not guaranteed
with any other USB cables.)
] indication
PictBridge