Hyundai power products HTDE1225 Original Instructions Manual

Electric lawn mower

Advertisement

Quick Links

ELECTRIC LAWN MOWER
HTDE1225
WARNING: Read thoroughly the instruction manual before use

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HTDE1225 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hyundai power products HTDE1225

  • Page 1 ELECTRIC LAWN MOWER HTDE1225 WARNING: Read thoroughly the instruction manual before use...
  • Page 2: Table Of Contents

    CONTENTS 1. GENERAL SAFETY INSTRUCTIONS……………………3 2. TECHNICAL DATA………………………………………...12 3. ASSEMBLY…………………………………………..……..14 4. OPERATION………………………………………..………17 5. MAINTENANCE AND STORAGE………………………..19 6. DECLARATION CE………………………………………..21 7. WA R R A N T Y……………………………………………22 8. P R O D U C T FA I L U R E……………………………23 9.
  • Page 3: General Safety Instructions

    1. GENERAL SAFETY INSTRUCTIONS A) LEARNING  Please read the operating instructions carefully. Familiarize yourself with the controls and proper use of the device.  Never allow children to use the device.  Never allow persons unfamiliar with the operating instructions to operate the device.
  • Page 4: Warnings And Hazards

    open sandals. Do not wear loose clothes or jewellery. Loose clothing, jewellery or long hair may be caught in moving parts.  Wear protective glasses during use.  Wearing a mask is recommended to prevent dust irritation.  Before use, always perform a visual inspection, especially of the blade, making sure that the screws and knife assembly are neither worn nor damaged.
  • Page 5 moulding or according to current standards, available on the market. Power supply cables should not be of a lower quality than type H05RN-F. H05RR-f.H05WF.H05VVH2-F. For outdoor use, with a minimum cross-section of 1.5 m². Attach the cable to its hook before starting the equipment.
  • Page 6  Mow in daylight or under adequate artificial light.  Avoid operating the device on wet grass or in the rain.  Never run the lawnmower over the power cable.  When mowing, the cable should always be behind the mower and in the area where the grass has already been cut.
  • Page 7  If the device starts vibrating abnormally.  Always be careful to your position on the slopes.  Mow facing the slopes, never from top to bottom.  Be extremely careful when changing direction on slopes.  Do not mow on slopes higher than 20°. ...
  • Page 8  Do not place your hands or feet under rotating parts.  When working on the grass catcher or ejection duct, always switch off the engine.  Never lift or carry a lawnmower with the engine running.  Stop the engine and disconnect the power cable: ...
  • Page 9 do not go on mowing, take the machine to an authorized service centre and ask for qualified personnel to solve the problem. C) Maintenance and storage  Regular maintenance is essential for safety and to maintain performance levels.  Check all bolts, nuts and screws to ensure that the device is in good working conditions.
  • Page 10  Wear sturdy gloves when removing and reassembling the blade.  Check the balance of the blade after sharpening.  For safety reasons, do not use the mower with worn cables or damaged parts.  Parts should be replaced and not repaired. ...
  • Page 11 Risk of splashing; keep people away. This product is doubly electrically insulated. Beware of sharp blades. The blades continue rotating after the engine has stopped. Unplug device from mains before maintenance, i.e. if the power cord is damaged. Guaranteed level of sound emission Keep the power cord away from cutting tools.
  • Page 12: Technical Data

    2. TECHNICAL DATA a) Parts list 1. Upper handle 2. Lower handle 3. Switch box 4. Grass collection compartment 5. Wheels 6. Motor protection 7. Cable hook 12 | Page...
  • Page 13 b) Technical data - Voltage: 230-240V~50Hz - Power index: 1200W - No-load speed: 3450min - Cutting height: 25/45/65mm - Cutting width: 320mm Protection class: II - Degree protection: IPX4 - Net weight: 8.9 kg Sound pressure level LpA (measured at the operator level according to EN836): 80.1 dB(A), k=3dB(A) Sound power level (measured according to European Directive 2000/14/EC: 92.2 dB(A), K=2.02dB(A)
  • Page 14: Assembly

    3. ASSEMBLY INSTRUCTIONS CUTTING HEIGHT ADJUSTMENT To obtain the desired cutting height, the front and rear axles are repositioned on the underside of the mower housing. Warning! Disconnect the mower from the power supply and ensure the blade has stopped coasting before adjusting the height.
  • Page 15 1. To adjust the front wheel cutting height position (fig. 2a) 1) Turn the mower upside down. 2) Pull the wheel axle towards the front of the mower. 3) Locate the wheel axle into the desired cutting height adjustment position. Note: Make sure that both front right and left wheels are located in the same cutting height adjustment position.
  • Page 16 Note: Make sure that both rear right and left wheel are located in the same cutting height adjustment position. 3. Cutting height positions (fig.2c) 25mm (lowest cutting height position) 45mm 65mm (highest cutting height position) 16 | Page...
  • Page 17: Operation

    4. OPERATING Connect to power supply Warning! Before connecting to the mains supply, always check the switch is in off position. Connect the plug into the RCD protected power supply. a. Starting On/Off switch fig.3) Caution! Do not start the mower if it is standing in long grass. Press the safety button (A) of the switch assembly and then pull the switch lever (B) against the bar.
  • Page 18  Turn left and change to position D.  Repeat the above processes if needed. c. Instructions for the grass catcher Putting the grass catcher in place: Lift the deflector and place the grass catcher on the tabs. Emptying the grass catcher: Before working on the grass catcher, switch off the engine and wait for the blade to fully stop.
  • Page 19: Maintenance And Storage

    5. MAINTENANCE AND STORAGE 1. Keep all nuts, bolts and screws firmly tightened to ensure that the mower can operate safely. 2. Check the mower deck and grass catcher frequently and make sure they are not worn or damaged. 3. Replace worn or damaged parts for your safety. 4.
  • Page 20 Replacing the blade: 9. Put the machine on its side. 10. Place the ring on the engine shaft. 11. Place the blade, screw and spring washer. 12. Position the blade on the centring devices. 20 | Page...
  • Page 21: Declaration Ce

    BUILDER SAS ZI, 32 rue aristide Bergès – 31270 Cugnaux - France Declares that the machinery designated below: ELECTRIC LAWN MOWER HTDE1225 Serial number: 20210229274-20210229373 Complies with the provisions of the Directive "machinery" 2006/42/EC and regulations National transposing it; Also complies with the following European directives: EMC Directive 2014/30/EU Noise Directive: 2000/14 / EC + Annex VI &...
  • Page 22: Warranty

    7. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor.
  • Page 23: Product Failure

    8. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine.
  • Page 24: Warranty Exclusions

    9. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
  • Page 25 ELECTRIC TRIMMER HTDE1225 ORIGINAL INSTRUCTIONS WARNING: Read thoroughly the instruction manual before use...
  • Page 26: Safety Instruction

    1. SAFETY INSTRUCTION WARNING! When using the machine the safety rules must be followed. For your own safety and bystanders please read these instruction before operating the machine. Please keep the instructions safe for later use. WARNING: Observe instructions for use. Read the instruction carefully;...
  • Page 27 Stop using machine while people, especially children, or pets are nearby; Only use the machine in daylight or good artificial light; Before using the machine and after any impact, check for signs of wear or damage and repair as necessary; Never operate the machine with damaged guards or without the guards in place;...
  • Page 28 manufacturer or his agent in order to avoid a safety hazard. General Safety Rules The grass trimmer must not be used by anyone under the age of 16. Always check the good working order of the trimmer which, if not adequate, could endanger the user. Before connecting the trimmer to the mains, make sure that the rotating parts are not damaged and the line-holding spool is inserted correctly and...
  • Page 29 Do not let other people or animals come within 5 metres of the trimmer when in use. Remain in a stable and secure position while operating the trimmer. Keep the area being cut free from wires, stones and debris. Do not cut against hard objects. This could cause injury or damage the trimmer.
  • Page 30 caused by the grass trimmer within the working area. during broad daylight with Only corresponding artificial light. Do not cross roads or gravel paths with the trimmer still running. When the trimmer is not in use, store it in a dry place and out of the reach of children.
  • Page 31 regularly and before using it each time, make sure the cable is not damaged or old out. If the cable is not in good condition, do not use the trimmer. Take it to an authorized service center instead. Only use an extension cable that is suitable for outdoor work.
  • Page 32 disconnected from the supply for the reason that damaged cords can lead to contact with live parts. Keep extension cords away from moving hazardous parts to avoid damages to the cords which can lead to contact with live parts. 2. Warning symbols Read the instructions Keep bystanders away carefully and be familiar with...
  • Page 33 4. Assembling The grass trimmer is supplied with some components not assembled. To assemble these proceed as follows: Assembling the motor housing (Fig. A) Insert the motor housing (6) into the handgrip (5), make sure the cable between will not be damaged.
  • Page 34 Mounting the guard (Fig. C) Align the reference indices of the body (2) of the spool holder (3) and of the guard (4). Insert the guard in the body (up to the collar) and rotate it in the direction indicated by the arrow until the hole of the guard corresponds to that of the body.
  • Page 35 6. Instructions for Use After reading the safety rules carefully, follow the instructions below attentively in order to get the most out of your grass trimmer. Start off slowly, when you have gained experience, you will be able to use the grass trimmer to its full potential.
  • Page 36 8. Trouble-Shooting CAUTION! Before every operation disconnect the electric power supply.  If the grass trimmer vibrates: remove the spool and clean its slot carefully removing any grass and so forth. If vibration persists after reassembly, replace the spool with a new one. In the event of the problem not disappearing, have the trimmer checked at an authorized service center.
  • Page 37 - It’s necessary to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time)
  • Page 38 BUILDER SAS ZI, 32 rue aristide Bergès – 31270 Cugnaux – France Declares that the machinery designated below: ELECTRIC TRIMMER HTDE1225 Serial number: 20210229274-20210229373 Complies with the provisions of the Directive "machinery" 2006/42/EC and regulations National transposing it; Also complies with the following European directives: EMC Directive 2014/30/EU Noise Directive: 2000/14 / EC + Annex VI &...
  • Page 39 1 2. WA R R A N T Y WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear.
  • Page 40 13. P R O D U C T FA I L U R E WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine.
  • Page 41 14. WA R R A N T Y E X C L U S I O N S THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. •...

Table of Contents