Advertisement
Quick Links
Advertisement
Related Manuals for Hyundai power products HTDER21V
Summary of Contents for Hyundai power products HTDER21V
- Page 1 ORIGINALS INSTRUCTIONS...
- Page 2 Introduction and safety WARNING! Before using your tool, please read this manual carefully and understand the instructions. Please keep these instructions for future use. If you give this tool to a third party, please also give this manual. Failure to comply with these safety rules is not only dangerous, but also voids the warranty conditions.
-
Page 3: Important Read Carefully Before Use Keep For Future Reference
Never replace non-metallic cutting elements with metal cutting elements. Do not expose the tool to rain or moisture. Do not use the tool when there is a risk of thunderstorms and lightning. Do not use the tool when weather conditions are poor. Do not insert metal objects into the charger or the battery connections, as this may cause a short circuit or be a source of danger. - Page 4 b) Periodically inspect the area where the machine is to be used and remove all stones, sticks, wires, bones, and other foreign objects. c) Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
- Page 5 Additional instructions 1. Congratulations on the purchase of this exceptional quality product. For best results with your mower, read all of these features. This user manual contains important information regarding the specifications of this product, its installation and use. 2. Read this user manual carefully before using the automatic mower. 3.
- Page 6 27. CAUTION: Do not touch the rotating blade. The blade must stop completely before handling. 28. Always check the baffle condition to keep the material discharge chute clean and unhindered. 29. Never run using the machine or its peripherals; 30. Always use the battery supplied with this machine. In case of replacement, contact your dealer or the manufacturer for the type (s) of batteries that can be used with this machine.
- Page 7 Symbols WARNING - Read instruction manual before use the tool WARNING - Risk of projections. Keep bystanders away In conformity with CE, RoHS WARNING - Sharp tines. Beware of cutting fingers or toes. Press the STOP button before working or lifting the machine. Read the instruction manual WARNING - Keep feet and hands away from rotating blades.
- Page 8 2. Main units and Accessories 2.1 Four main units This section contains information you should be aware of when planning to install the robotic mower. 2.1.1. Robotic Mower: An automatic lawn mower that mows the lawn by moving in an irregular pattern, the mower is powered by a rechargeable battery.
- Page 9 2.2. Knowing Robotic Mower and Accessories...
- Page 10 1. Stop button 2. The control panel cover 3. Drive wheel 4. Charging strip 5. Front wheel 6. Protect plate 7. Handle 8. Charge 9. Blade 10. Blade Plate 11. LCD display 12. Cutting height adjustment 13. Power switch 14. Sonic switch 15.
- Page 11 3.2 Mowing technique 1. The mowing way used by mower is based on an effective and energy efficient components. We recommend you allow mower to mainly mow in dry weather to obtain the best possible effect. 2. Mower can mow in the rain, you may fix wheel brushes to keep the drive wheels clean and increase traction.
- Page 12 Handle Sensor The OPEN/STOP button in the back of mower is used to stop the mower when it's running. Pressing the bottom will also open the control panel cover, if you need to get the mower back to work, you must close the cover. Open /Stop Button Under the control panel cover, there is a control panel, it is used to manage all the mower settings.
- Page 13 3.4 Movement pattern The mower's movement pattern is paralleled determined by mower itself. When the mower senses that it has reached all boundaries of the lawn, the mower will enter into random pattern. This mowing system enables the lawn to be mown equally without any mowing lines. If mower enters an area where it senses the grass is longer than earlier, it can change the moving speed low.
- Page 14 4.1 Preparations 1. If the grass in the proposed working area is taller than 10cm, Please mow it first using a normal lawn mower. Then collect the clippings. 2. Check that all components are included: a. Operator's Manual b. Mower c.
- Page 15 b. The signal generator must be positioned on the same horizontal level. The height difference must not differ more than 3cm. c. It is possible to let the low voltage cable being laid across the working area. It must be either stapled down or buried. In some cases, a better option is to position the signal generator close to a house wall .
- Page 16 4.3 Charging the battery Mower is supplied with an uncharged batter. You can insert the plug of the power adapter in back of the mower 4.4 Installation of the boundary wire 1. If you want to make adjustments to the boundary wire in the future, it is preferable to staple the boundary wire on the ground.
- Page 17 4.5 Obstacle instruction 1. Tree, pole, brick, or heavy obstacle with hard and sturdy materials may serve as natural boarders; boundary wire is optional around these obstacles. 2. Plants and objects with refined and fragile surface materials need to be bound by wire for protection.
- Page 18 5. Use a hammer to hammer down the staples into the ground. Exercise with care When knocking the staples and make sure the wire is flat on the lawn, the distance of each staple should be approximately 100cm (3ft). But around the corner, staples distance is 30~ 50cm (1~2ft) maybe.
- Page 19 Boundary Wire Guide wire 4.7 Checking the installation Check the green LED signal light on the signal generator to ensure the boundary wire is properly installed. ● Flashing once every other second: The signal is good. ● Not light: Means fail to connect the loop and no signal is found. 5.
- Page 20 5.4 Stopping mower Press the STOP/OPEN button, the mower will stops, and the blade motor stops in one second, and the control panel cover will be opened. Press 5.5 Restart When completed the control panel operating, you may close the control panel cover to restart Egen Mower automatically.
- Page 21 T-bar handle Pull/Push the T-bar to target position then lower down the handle. 6. Control panel Power ON/OFF : Power ON/OFF button If you press the button, the mower will power on, and if you press once again, the mower will power off.
- Page 22 8. Cleaning 1. Never use a high-pressure washer or even running water to clean mower. 2. It is important to keep mower clean. A mower with a large amount of clippings negotiates blades slopes very poorly, and needs more power to driver the blade plate.
- Page 23 Step7. Screw tight the new blade. Step8. Because blades turn only one direction, so only one side of the blade is worn each time, thus we can flip to another side to prolong the usage of the blade. 10. Winter storage 1.
- Page 24 Electrical products should not be discarded with household products. According to the European Directive 2012/19/EU on waste electrical and electronic equipment and its implementation into national law, electrical products used must be collected separately and disposed of at collection points provided for this purpose. Talk with your local authorities or dealer for advice on recycling.
- Page 25 BUILDER SAS ZI, 32 rue Aristide Berges – 31270 Cugnaux - France Declares that the machine indicated below: MOWER ROBOT HTDER21V Serial number Complies with the provisions of the Directive "machinery" 2006/42 / EC and national laws transposing it; Also complies with the following European directives:...
Need help?
Do you have a question about the HTDER21V and is the answer not in the manual?
Questions and answers